Fit-out and new-build lighting in Mid Glamorgan
Fit-out lighting is the installation of new lighting, controls and emergency lighting during a commercial fit-out, refurbishment or new-build, from first-fix containment and cabling to second-fix luminaires and commissioning. We cover Mid Glamorgan, including Rhondda, Tonypandy and Bridgend.
Fit-out and new-build lighting work in Mid Glamorgan
We coordinate with ceiling and partition trades on Mid Glamorgan fit-outs so first fix is done before ceilings close.
Fit-outs in Mid Glamorgan need lighting that meets current energy rules on the day building control signs off, so we check efficacy at design stage.
What's included
- Coordination with ceiling, partition and M&E trades
- First-fix containment and cabling, second-fix luminaires
- Part L (or national equivalent) efficacy evidence for building control
- Controls designed in, not bolted on
Guide prices in Mid Glamorgan
Typical budgets for Mid Glamorgan, supplied and installed, excluding VAT. Your fixed price follows a free survey.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £50 – £145 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £195 | per fitting, supplied and fitted |
| Emergency luminaire or exit sign | £60 – £145 | per fitting, supplied and fitted |
| DALI dimming and control | £50 – £145 | per luminaire, on top of the fitting |
Example: 80 LED fittings and 20 emergency fittings in a new office fit-out, about £5,050 – £14,550 excluding VAT.
Rules that apply in Mid Glamorgan
For buildings in Mid Glamorgan, the duty to provide adequate emergency lighting where escape routes need it, and to keep it tested, sits with the responsible person under the Regulatory Reform (Fire Safety) Order 2005.
The Welsh Approved Document L Volume 2 (2022) uses 95 luminaire lumens per circuit-watt for general lighting, with alternatives such as LENI. A new Welsh edition takes effect from 4 March 2027 with a higher figure of more than 105.
Towns we cover in Mid Glamorgan
- Rhondda
- Tonypandy
- Bridgend
- Merthyr Tydfil
- Coity
- Pontypridd
- Aberdare
- Maesteg
- Porthcawl
- Cymmer
- Cynffig
- Garw Valley
- Llanharan
- Llantwit Fardre
- Pencoed
- Penrhiwceiber
- Treharris
- Treorchy
- Ystrad
Fit-out and new-build lighting FAQs for Mid Glamorgan
Which towns in Mid Glamorgan do you cover?
All of Mid Glamorgan, including Rhondda, Tonypandy and Bridgend. See the towns list on this page for local pages.
What energy rules apply to new lighting in Mid Glamorgan?
The Welsh Approved Document L sets the efficiency that new lighting in Mid Glamorgan must meet. We check fittings against it at design stage and keep the evidence for building control.
Do you work as a subcontractor?
Yes. We can work for a main contractor or directly for the occupier.