COMMERCIALLighting.uk

LED high bay lighting installation

High bays for factories, workshops, sports halls and tall spaces. Free survey, fixed-price quote and certified installation across England, Wales, Scotland and Northern Ireland.

What is LED high bay lighting?

High bay lighting is lighting designed for tall spaces, typically with mounting heights of about six metres and above, such as factories, workshops, sports halls and trade counters. LED high bays replace metal halide and sodium lamps, come on instantly and can be dimmed or switched by sensors.

Light industrial unit lit by LED linear high bay fittings over workbenches

What's included

  • Round or linear LED high bays chosen for mounting height and task
  • Lift or scaffold access and safe isolation of existing circuits
  • Dimming and presence control where areas are used intermittently
  • Ball-impact-rated fittings or guards in sports halls
  • Removal and recycling of old lamps and gear
  • Certification and lux readings on completion

How we deliver LED high bay lighting

  1. Survey

    Mounting heights, roof structure, task areas and existing circuits.

  2. Design

    Fitting type, optic and spacing chosen to light the floor evenly.

  3. Install

    Fitted from MEWPs with the area safely zoned off.

  4. Commission

    Sensors set, readings taken and certificates issued.

Guide prices

National guide budgets, supplied and installed, excluding VAT. Your fixed price follows a free survey.

LED high bay lighting guide prices
ItemGuide budget (ex VAT)Basis
LED high bay£150 – £400per fitting, supplied and fitted
Scissor or boom lift hire£150 – £300per day
Presence (PIR) sensor£40 – £80per sensor, installed
DALI dimming and control£50 – £150per luminaire, on top of the fitting

Example: 30 LED high bays in a workshop, with 2 days of lift hire: about £4,800 – £12,600 excluding VAT. Get a figure for your site.

Standards and rules we work to

TopicCurrent position
WiringBS 7671:2018+A4:2026, the 18th Edition IET Wiring Regulations. Every installation is tested and certified.
Workplace light levelsBS EN 12464-1:2021, for example 500 lux on office task areas and 150 lux at the floor of rack storage.
Emergency lightingBS 5266-1:2025 code of practice, BS EN 1838:2024 light levels and BS EN 50172:2024 testing and records.
Energy efficiency of new lightingEngland: Approved Document L (95 luminaire lm/circuit-W, rising above 105 from 24 March 2027). Wales: Welsh Approved Document L (new edition from 4 March 2027). Scotland: Section 6. Northern Ireland: Technical Booklet F2.
Fire safety dutiesEngland and Wales: Regulatory Reform (Fire Safety) Order 2005. Scotland: Fire (Scotland) Act 2005. Northern Ireland: Fire Safety Regulations (Northern Ireland) 2010.
WasteFluorescent tubes are hazardous waste and are recycled through authorised routes, with paperwork.

LED high bay lighting FAQs

What is the difference between a high bay and a low bay?

High bays are designed for tall spaces, usually above six metres, with optics that throw light down to the floor. Low bays are for lower ceilings and spread light more widely.

Can LED high bays be dimmed?

Yes. Most LED high bays are available with DALI or 1–10 V dimming and can be paired with presence and daylight sensors.

How long do LED high bays last?

Quality LED high bays are typically rated for tens of thousands of hours. Check the manufacturer's rated life and warranty on the specific fitting quoted.

LED high bay lighting by area

We provide LED high bay lighting in every part of the UK. Choose your area:

Related services

Guides

Get a fixed-price lighting quote

Free survey, clear scope, certified work. Prices exclude VAT.