Fit-out and new-build lighting in Moray
Fit-out lighting is the installation of new lighting, controls and emergency lighting during a commercial fit-out, refurbishment or new-build, from first-fix containment and cabling to second-fix luminaires and commissioning. We cover Moray, including Elgin, Aberlour and Ballindalloch.
Fit-out and new-build lighting work in Moray
Fit-outs in Moray need lighting that meets current energy rules on the day building control signs off, so we check efficacy at design stage.
We coordinate with ceiling and partition trades on Moray fit-outs so first fix is done before ceilings close.
We cover Moray by arrangement. Because of travel and access, visits are usually grouped with other work in Moray, so please allow more time for a survey and tell us about any ferry or access constraints.
What's included
- Certificates, as-fitted schedules and O&M information
- Controls designed in, not bolted on
- First-fix containment and cabling, second-fix luminaires
- Part L (or national equivalent) efficacy evidence for building control
Guide prices in Moray
Typical budgets for Moray, supplied and installed, excluding VAT. Your fixed price follows a free survey.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £50 – £150 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £200 | per fitting, supplied and fitted |
| Emergency luminaire or exit sign | £60 – £150 | per fitting, supplied and fitted |
| DALI dimming and control | £50 – £150 | per luminaire, on top of the fitting |
Example: 80 LED fittings and 20 emergency fittings in a new office fit-out, about £5,200 – £15,000 excluding VAT.
Rules that apply in Moray
Emergency lighting in Moray falls under the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006. The responsible person must make sure people can see their way out if the power fails, and keep records of testing.
Standard 6.5 of the Scottish building standards covers efficient, controllable lighting. The non-domestic guidance uses 95 luminaire lumens per circuit-watt for general lighting, or LENI.
Towns we cover in Moray
Fit-out and new-build lighting FAQs for Moray
What energy rules apply to new lighting in Moray?
Section 6 of the Scottish building standards sets the efficiency that new lighting in Moray must meet. We check fittings against it at design stage and keep the evidence for building control.
Which fire safety law applies in Moray?
The Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 sets the duties of the person responsible for fire safety, including emergency lighting where escape routes need it.
Do you work as a subcontractor?
Yes. We can work for a main contractor or directly for the occupier.