LED high bay lighting in Argyll and Bute
High bay lighting is lighting designed for tall spaces, typically with mounting heights of about six metres and above, such as factories, workshops, sports halls and trade counters. We cover Argyll and Bute, including Ardrishaig, Ballygrant and Bowmore.
LED high bay lighting work in Argyll and Bute
We fit high bays in Argyll and Bute from scissor or boom lifts, with the floor below zoned off and existing circuits isolated first.
Replacing sodium high bays in Argyll and Bute also improves colour rendering, which matters in workshops where people check finishes and wiring colours.
We cover Argyll and Bute by arrangement. Because of travel and access, visits are usually grouped with other work in Argyll and Bute, so please allow more time for a survey and tell us about any ferry or access constraints.
What's included
- Lift or scaffold access and safe isolation of existing circuits
- Removal and recycling of old lamps and gear
- Round or linear LED high bays chosen for mounting height and task
- Certification and lux readings on completion
Guide prices in Argyll and Bute
Typical budgets for Argyll and Bute, supplied and installed, excluding VAT. Your fixed price follows a free survey.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £150 – £400 | per fitting, supplied and fitted |
| Scissor or boom lift hire | £150 – £300 | per day |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| DALI dimming and control | £50 – £150 | per luminaire, on top of the fitting |
Example: 30 LED high bays in a workshop, with 2 days of lift hire, about £4,800 – £12,600 excluding VAT.
Rules that apply in Argyll and Bute
Standard 6.5 of the Scottish building standards covers efficient, controllable lighting. The non-domestic guidance uses 95 luminaire lumens per circuit-watt for general lighting, or LENI.
Towns we cover in Argyll and Bute
- Ardrishaig
- Ballygrant
- Bowmore
- Bridge of Orchy
- Bunessan
- Cairndow
- Campbeltown
- Crossapol
- Dunoon
- Helensburgh
- Lochdon
- Lochgilphead
- Lochgoilhead
- Oban
- Port Askaig
- Port Charlotte
- Port Ellen
- Portnahaven
- Rothesay
- Scalasaig
- Strachur
- Tighnabruaich
LED high bay lighting FAQs for Argyll and Bute
What energy rules apply to new lighting in Argyll and Bute?
Section 6 of the Scottish building standards sets the efficiency that new lighting in Argyll and Bute must meet. We check fittings against it at design stage and keep the evidence for building control.
Which towns in Argyll and Bute do you cover?
All of Argyll and Bute, including Ardrishaig, Ballygrant and Bowmore. See the towns list on this page for local pages.
Can LED high bays be dimmed?
Yes. Most LED high bays are available with DALI or 1–10 V dimming and can be paired with presence and daylight sensors.
What is the difference between a high bay and a low bay?
High bays are designed for tall spaces, usually above six metres, with optics that throw light down to the floor. Low bays are for lower ceilings and spread light more widely.