LED high bay lighting in Clwyd
High bay lighting is lighting designed for tall spaces, typically with mounting heights of about six metres and above, such as factories, workshops, sports halls and trade counters. We cover Clwyd, including Wrexham, Buckley and Deeside.
LED high bay lighting work in Clwyd
Replacing sodium high bays in Clwyd also improves colour rendering, which matters in workshops where people check finishes and wiring colours.
Workshops and factories around Clwyd often have high bays mounted at seven to ten metres, which is where LED's instant start and dimming make the biggest difference.
What's included
- Round or linear LED high bays chosen for mounting height and task
- Ball-impact-rated fittings or guards in sports halls
- Lift or scaffold access and safe isolation of existing circuits
- Dimming and presence control where areas are used intermittently
Guide prices in Clwyd
Typical budgets for Clwyd, supplied and installed, excluding VAT. Your fixed price follows a free survey.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £145 – £390 | per fitting, supplied and fitted |
| Scissor or boom lift hire | £145 – £290 | per day |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| DALI dimming and control | £50 – £145 | per luminaire, on top of the fitting |
Example: 30 LED high bays in a workshop, with 2 days of lift hire, about £4,650 – £12,200 excluding VAT.
Rules that apply in Clwyd
The Welsh Approved Document L Volume 2 (2022) uses 95 luminaire lumens per circuit-watt for general lighting, with alternatives such as LENI. A new Welsh edition takes effect from 4 March 2027 with a higher figure of more than 105.
Towns we cover in Clwyd
- Wrexham
- Buckley
- Deeside
- Colwyn Bay
- Flint
- Rhyl
- Hawarden
- Rhosllannerchrugog
- Prestatyn
- Brymbo
- Llandudno
- Betws-yn-Rhos
- Bro Machno
- Corwen
- Deganwy
- Denbigh
- Dolwyddelan
- Gresford
- Henryd
- Holywell
- Llanfairfechan
- Llangollen
- Llanrwst
- Mold
- Penmaenmawr
- Ruthin
- Saltney
- St Asaph
- Trefriw
LED high bay lighting FAQs for Clwyd
Which towns in Clwyd do you cover?
All of Clwyd, including Wrexham, Buckley and Deeside. See the towns list on this page for local pages.
Which fire safety law applies in Clwyd?
The Regulatory Reform (Fire Safety) Order 2005 sets the duties of the person responsible for fire safety, including emergency lighting where escape routes need it.
What is the difference between a high bay and a low bay?
High bays are designed for tall spaces, usually above six metres, with optics that throw light down to the floor. Low bays are for lower ceilings and spread light more widely.
Can LED high bays be dimmed?
Yes. Most LED high bays are available with DALI or 1–10 V dimming and can be paired with presence and daylight sensors.