LED high bay lighting in Fife
High bay lighting is lighting designed for tall spaces, typically with mounting heights of about six metres and above, such as factories, workshops, sports halls and trade counters. We cover Fife, including Dunfermline, Kirkcaldy and Glenrothes.
LED high bay lighting work in Fife
Replacing sodium high bays in Fife also improves colour rendering, which matters in workshops where people check finishes and wiring colours.
Sports halls in Fife need ball-resistant high bays or guards. We specify impact-rated fittings where balls are in play.
What's included
- Removal and recycling of old lamps and gear
- Dimming and presence control where areas are used intermittently
- Ball-impact-rated fittings or guards in sports halls
- Lift or scaffold access and safe isolation of existing circuits
Guide prices in Fife
Typical budgets for Fife, supplied and installed, excluding VAT. Your fixed price follows a free survey.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £150 – £400 | per fitting, supplied and fitted |
| Scissor or boom lift hire | £150 – £300 | per day |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| DALI dimming and control | £50 – £150 | per luminaire, on top of the fitting |
Example: 30 LED high bays in a workshop, with 2 days of lift hire, about £4,800 – £12,600 excluding VAT.
Rules that apply in Fife
Standard 6.5 of the Scottish building standards covers efficient, controllable lighting. The non-domestic guidance uses 95 luminaire lumens per circuit-watt for general lighting, or LENI.
Towns we cover in Fife
- Dunfermline
- Kirkcaldy
- Glenrothes
- St Andrews
- Anstruther
- Burntisland
- Cowdenbeath
- Cupar
- Dalgety Bay
- Inverkeithing
- Kilconquhar
- Leven
- Lochgelly
- Methil
- Rosyth
- Tayport
LED high bay lighting FAQs for Fife
Which towns in Fife do you cover?
All of Fife, including Dunfermline, Kirkcaldy and Glenrothes. See the towns list on this page for local pages.
What energy rules apply to new lighting in Fife?
Section 6 of the Scottish building standards sets the efficiency that new lighting in Fife must meet. We check fittings against it at design stage and keep the evidence for building control.
Can LED high bays be dimmed?
Yes. Most LED high bays are available with DALI or 1–10 V dimming and can be paired with presence and daylight sensors.
What is the difference between a high bay and a low bay?
High bays are designed for tall spaces, usually above six metres, with optics that throw light down to the floor. Low bays are for lower ceilings and spread light more widely.