LED high bay lighting in Hertfordshire
High bay lighting is lighting designed for tall spaces, typically with mounting heights of about six metres and above, such as factories, workshops, sports halls and trade counters. We cover Hertfordshire, including Watford, Hemel Hempstead and Stevenage.
LED high bay lighting work in Hertfordshire
Replacing sodium high bays in Hertfordshire also improves colour rendering, which matters in workshops where people check finishes and wiring colours.
We fit high bays in Hertfordshire from scissor or boom lifts, with the floor below zoned off and existing circuits isolated first.
What's included
- Removal and recycling of old lamps and gear
- Ball-impact-rated fittings or guards in sports halls
- Round or linear LED high bays chosen for mounting height and task
- Certification and lux readings on completion
Guide prices in Hertfordshire
Typical budgets for Hertfordshire, supplied and installed, excluding VAT. Your fixed price follows a free survey.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £155 – £410 | per fitting, supplied and fitted |
| Scissor or boom lift hire | £155 – £310 | per day |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| DALI dimming and control | £50 – £155 | per luminaire, on top of the fitting |
Example: 30 LED high bays in a workshop, with 2 days of lift hire, about £4,950 – £13,000 excluding VAT.
Rules that apply in Hertfordshire
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
Towns we cover in Hertfordshire
- Watford
- Hemel Hempstead
- Stevenage
- St Albans
- Welwyn Garden City
- Cheshunt
- Hatfield
- Bishops Stortford
- Borehamwood
- Hitchin
- Hoddesdon
- Letchworth Garden City
- North Watford
- Harpenden
- Bushey
- Hertford
- Rickmansworth
- Potters Bar
- Berkhamsted
- Ware
- Abbots Langley
- Buntingford
- Bygrave
- Ippollitts
- Kings Langley
- Knebworth
- Much Hadham
- Radlett
- Redbourn
- Sandridge
- Sawbridgeworth
- Standon
- Tring
- Welwyn
LED high bay lighting FAQs for Hertfordshire
Which towns in Hertfordshire do you cover?
All of Hertfordshire, including Watford, Hemel Hempstead and Stevenage. See the towns list on this page for local pages.
How are prices set in Hertfordshire?
Our guide prices are adjusted for regional labour costs. After a survey you get a fixed price for the agreed scope.
Can LED high bays be dimmed?
Yes. Most LED high bays are available with DALI or 1–10 V dimming and can be paired with presence and daylight sensors.
What is the difference between a high bay and a low bay?
High bays are designed for tall spaces, usually above six metres, with optics that throw light down to the floor. Low bays are for lower ceilings and spread light more widely.