LED high bay lighting in North Yorkshire
High bay lighting is lighting designed for tall spaces, typically with mounting heights of about six metres and above, such as factories, workshops, sports halls and trade counters. We cover North Yorkshire, including York, Middlesbrough and Harrogate.
LED high bay lighting work in North Yorkshire
Sports halls in North Yorkshire need ball-resistant high bays or guards. We specify impact-rated fittings where balls are in play.
We fit high bays in North Yorkshire from scissor or boom lifts, with the floor below zoned off and existing circuits isolated first.
What's included
- Removal and recycling of old lamps and gear
- Dimming and presence control where areas are used intermittently
- Round or linear LED high bays chosen for mounting height and task
- Lift or scaffold access and safe isolation of existing circuits
Guide prices in North Yorkshire
Typical budgets for North Yorkshire, supplied and installed, excluding VAT. Your fixed price follows a free survey.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £145 – £390 | per fitting, supplied and fitted |
| Scissor or boom lift hire | £145 – £290 | per day |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| DALI dimming and control | £50 – £145 | per luminaire, on top of the fitting |
Example: 30 LED high bays in a workshop, with 2 days of lift hire, about £4,650 – £12,200 excluding VAT.
Rules that apply in North Yorkshire
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
Towns we cover in North Yorkshire
- York
- Middlesbrough
- Harrogate
- Scarborough
- Redcar
- Selby
- Thornaby-on-Tees
- Yarm
- Guisborough
- Northallerton
- Ripon
- Boroughbridge
- Clint
- Colburn
- Copmanthorpe
- Earswick
- Easingwold
- Great and Little Broughton
- Grimston
- Hutton Mulgrave
- Knaresborough
- Langcliffe
- Loftus
- Marske
- Muston
- Nawton
- North Stainley
- Pickering
- Rawcliffe
- Saltburn Marske and New Marske
- Settrington
- Skeeby
- Skelton
- Snainton
- Sowerby
- Spennithorne
- Stainton
- Stainton Dale
- Thorlby
- Thornton-le-Clay
- Upper Poppleton
- Wheldrake
- Winton
- Yafforth
LED high bay lighting FAQs for North Yorkshire
Which fire safety law applies in North Yorkshire?
The Regulatory Reform (Fire Safety) Order 2005 sets the duties of the person responsible for fire safety, including emergency lighting where escape routes need it.
What energy rules apply to new lighting in North Yorkshire?
Approved Document L sets the efficiency that new lighting in North Yorkshire must meet. We check fittings against it at design stage and keep the evidence for building control.
Can LED high bays be dimmed?
Yes. Most LED high bays are available with DALI or 1–10 V dimming and can be paired with presence and daylight sensors.
What is the difference between a high bay and a low bay?
High bays are designed for tall spaces, usually above six metres, with optics that throw light down to the floor. Low bays are for lower ceilings and spread light more widely.