LED high bay lighting in South Glamorgan
High bay lighting is lighting designed for tall spaces, typically with mounting heights of about six metres and above, such as factories, workshops, sports halls and trade counters. We cover South Glamorgan, including Cardiff, Barry and Penarth.
LED high bay lighting work in South Glamorgan
Workshops and factories around South Glamorgan often have high bays mounted at seven to ten metres, which is where LED's instant start and dimming make the biggest difference.
We fit high bays in South Glamorgan from scissor or boom lifts, with the floor below zoned off and existing circuits isolated first.
What's included
- Ball-impact-rated fittings or guards in sports halls
- Lift or scaffold access and safe isolation of existing circuits
- Certification and lux readings on completion
- Removal and recycling of old lamps and gear
Guide prices in South Glamorgan
Typical budgets for South Glamorgan, supplied and installed, excluding VAT. Your fixed price follows a free survey.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £145 – £390 | per fitting, supplied and fitted |
| Scissor or boom lift hire | £145 – £290 | per day |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| DALI dimming and control | £50 – £145 | per luminaire, on top of the fitting |
Example: 30 LED high bays in a workshop, with 2 days of lift hire, about £4,650 – £12,200 excluding VAT.
Rules that apply in South Glamorgan
The Welsh Approved Document L Volume 2 (2022) uses 95 luminaire lumens per circuit-watt for general lighting, with alternatives such as LENI. A new Welsh edition takes effect from 4 March 2027 with a higher figure of more than 105.
Towns we cover in South Glamorgan
LED high bay lighting FAQs for South Glamorgan
How are prices set in South Glamorgan?
Our guide prices are adjusted for regional labour costs. After a survey you get a fixed price for the agreed scope.
What energy rules apply to new lighting in South Glamorgan?
The Welsh Approved Document L sets the efficiency that new lighting in South Glamorgan must meet. We check fittings against it at design stage and keep the evidence for building control.
What is the difference between a high bay and a low bay?
High bays are designed for tall spaces, usually above six metres, with optics that throw light down to the floor. Low bays are for lower ceilings and spread light more widely.
How long do LED high bays last?
Quality LED high bays are typically rated for tens of thousands of hours. Check the manufacturer's rated life and warranty on the specific fitting quoted.