LED high bay lighting in Staffordshire
High bay lighting is lighting designed for tall spaces, typically with mounting heights of about six metres and above, such as factories, workshops, sports halls and trade counters. We cover Staffordshire, including Stoke-on-Trent, Newcastle under Lyme and Burton upon Trent.
LED high bay lighting work in Staffordshire
We fit high bays in Staffordshire from scissor or boom lifts, with the floor below zoned off and existing circuits isolated first.
Workshops and factories around Staffordshire often have high bays mounted at seven to ten metres, which is where LED's instant start and dimming make the biggest difference.
What's included
- Ball-impact-rated fittings or guards in sports halls
- Lift or scaffold access and safe isolation of existing circuits
- Round or linear LED high bays chosen for mounting height and task
- Dimming and presence control where areas are used intermittently
Guide prices in Staffordshire
Typical budgets for Staffordshire, supplied and installed, excluding VAT. Your fixed price follows a free survey.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £150 – £400 | per fitting, supplied and fitted |
| Scissor or boom lift hire | £150 – £300 | per day |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| DALI dimming and control | £50 – £150 | per luminaire, on top of the fitting |
Example: 30 LED high bays in a workshop, with 2 days of lift hire, about £4,800 – £12,600 excluding VAT.
Rules that apply in Staffordshire
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
Towns we cover in Staffordshire
- Stoke-on-Trent
- Newcastle under Lyme
- Burton upon Trent
- Cannock
- Tamworth
- Stafford
- Lichfield
- Kidsgrove
- Burntwood
- Longton
- Rugeley
- Leek
- Great Wyrley
- Biddulph
- Bagnall
- Barlaston
- Bilbrook
- Branston
- Cheadle
- Eccleshall
- Forsbrook
- Gnosall
- Hopton
- Kinver
- Penkridge
- Stone
- Uttoxeter
- Wombourne
LED high bay lighting FAQs for Staffordshire
What energy rules apply to new lighting in Staffordshire?
Approved Document L sets the efficiency that new lighting in Staffordshire must meet. We check fittings against it at design stage and keep the evidence for building control.
How are prices set in Staffordshire?
Our guide prices are adjusted for regional labour costs. After a survey you get a fixed price for the agreed scope.
What is the difference between a high bay and a low bay?
High bays are designed for tall spaces, usually above six metres, with optics that throw light down to the floor. Low bays are for lower ceilings and spread light more widely.
How long do LED high bays last?
Quality LED high bays are typically rated for tens of thousands of hours. Check the manufacturer's rated life and warranty on the specific fitting quoted.