LED lighting upgrades in Irvine
Swap fluorescent, halogen and metal halide fittings for efficient LED. Available across Irvine and Ayrshire. In Irvine warehouses and workshops the biggest savings come from swapping metal halide high bays for LED, where a 400 W lamp plus gear can often be replaced by a fitting drawing 150 W or less.
Local LED lighting upgrades in Irvine
An LED upgrade in Irvine is also the cheapest moment to add presence or daylight sensors, because the electrician is already working on every fitting.
We quote Irvine LED upgrades as a fixed price with a fitting schedule, so you can see exactly what is being replaced, where, and what it should save.
We cover the whole of Irvine, including the KA12, KA11 and KA13 postcode districts, and nearby places such as Kilwinning, Gatehead and Saltcoats.
Irvine at a glance
What's included
- Complete LED luminaires rather than tube swaps, so old control gear is removed
- A walk-round survey counting fittings, wattages, running hours and ceiling types
- Testing and a BS 7671 certificate for the work, with a schedule of what was fitted
- Optional presence and daylight sensors to cut running hours further
Guide prices in Irvine
Typical budgets for Irvine premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £50 – £150 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £200 | per fitting, supplied and fitted |
| LED high bay | £150 – £400 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
Example: 40 LED panels replacing fluorescent fittings in a 400 m² office, about £2,000 – £6,000 excluding VAT. Fixed price after a free survey.
Rules that apply in Irvine
Standard 6.5 of the Scottish building standards covers efficient, controllable lighting. The non-domestic guidance uses 95 luminaire lumens per circuit-watt for general lighting, or LENI.
In Great Britain, including Scotland, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Scotland does not use the England and Wales EPC E letting rule. Instead, some non-domestic buildings over 1,000 m² need an action plan when sold or let, under Section 63 regulations.
Irvine FAQs
Do you cover all of Irvine?
Yes. We work across Irvine and the KA12, KA11 and KA13 postcode districts, plus nearby places such as Kilwinning, Gatehead and Saltcoats.
Do you remove the old fittings in Irvine?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
Which rules apply to lighting work in Irvine?
Fire safety duties come from the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006. For new lighting, Section 6 of the Scottish building standards sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
How long does an office LED upgrade take?
A typical 400 m² office with around 40 fittings is often a one- or two-day job. Larger sites are phased zone by zone, and we can work evenings or weekends.
LED lighting upgrades near Irvine
- LED lighting upgrades in Kilwinning
- LED lighting upgrades in Gatehead
- LED lighting upgrades in Saltcoats
- LED lighting upgrades in Troon
- LED lighting upgrades in Kilmarnock
- LED lighting upgrades in Ardrossan