LED lighting upgrades in Aylesbury
Swap fluorescent, halogen and metal halide fittings for efficient LED. Most Aylesbury businesses we survey still have a mix of T8 battens, 600×600 fluorescent panels and the odd halogen downlight. Replacing them with complete LED luminaires usually cuts lighting energy by a third to a half.
Local LED lighting upgrades in Aylesbury
We quote Aylesbury LED upgrades as a fixed price with a fitting schedule, so you can see exactly what is being replaced, where, and what it should save.
In Aylesbury warehouses and workshops the biggest savings come from swapping metal halide high bays for LED, where a 400 W lamp plus gear can often be replaced by a fitting drawing 150 W or less.
We cover the whole of Aylesbury, including the HP20, HP19 and HP21 postcode districts, and nearby places such as Weston Turville, Dinton and Princes Risborough.
Aylesbury at a glance
What's included
- Like-for-like or re-planned layouts so light levels meet BS EN 12464-1
- Optional presence and daylight sensors to cut running hours further
- Safe removal and recycling of old fluorescent tubes as hazardous waste
- Complete LED luminaires rather than tube swaps, so old control gear is removed
Guide prices in Aylesbury
Typical budgets for Aylesbury premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £55 – £160 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £85 – £215 | per fitting, supplied and fitted |
| LED high bay | £160 – £430 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £45 – £85 | per sensor, installed |
Example: 40 LED panels replacing fluorescent fittings in a 400 m² office, about £2,150 – £6,400 excluding VAT. Fixed price after a free survey.
Rules that apply in Aylesbury
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Aylesbury FAQs
Do you remove the old fittings in Aylesbury?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
Is the price fixed?
Yes. After the survey you get a fixed price for the scope agreed. If you add to the scope later, we price the extra before doing it.
Which rules apply to lighting work in Aylesbury?
Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
How long does an office LED upgrade take?
A typical 400 m² office with around 40 fittings is often a one- or two-day job. Larger sites are phased zone by zone, and we can work evenings or weekends.
LED lighting upgrades near Aylesbury
- LED lighting upgrades in Weston Turville
- LED lighting upgrades in Dinton
- LED lighting upgrades in Princes Risborough
- LED lighting upgrades in Tring
- LED lighting upgrades in Ashendon
- LED lighting upgrades in Great Missenden