LED lighting upgrades in Balsham
Swap fluorescent, halogen and metal halide fittings for efficient LED. Available across Balsham and Cambridgeshire. In Balsham warehouses and workshops the biggest savings come from swapping metal halide high bays for LED, where a 400 W lamp plus gear can often be replaced by a fitting drawing 150 W or less.

Local LED lighting upgrades in Balsham
For an LED upgrade in Balsham we start by counting fittings and running hours, because payback depends far more on how long lights are on than on the price of the fittings.
Most Balsham businesses we survey still have a mix of T8 battens, 600×600 fluorescent panels and the odd halogen downlight. Replacing them with complete LED luminaires usually cuts lighting energy by a third to a half.
Our teams travel to Balsham from across Cambridgeshire. Typical nearby jobs include Fulbourn, Haverhill and Little Shelford, so we can often combine survey visits.
Balsham at a glance
What's included
- Complete LED luminaires rather than tube swaps, so old control gear is removed
- Like-for-like or re-planned layouts so light levels meet BS EN 12464-1
- Safe removal and recycling of old fluorescent tubes as hazardous waste
- A walk-round survey counting fittings, wattages, running hours and ceiling types
Guide prices in Balsham
Typical budgets for Balsham premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £50 – £155 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £205 | per fitting, supplied and fitted |
| LED high bay | £155 – £410 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
Example: 40 LED panels replacing fluorescent fittings in a 400 m² office, about £2,050 – £6,200 excluding VAT. Fixed price after a free survey.
Rules that apply in Balsham
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Privately rented commercial property in England generally needs an EPC of E or better, or a registered exemption, and lighting is one of the cheaper ways to improve a rating.
Balsham FAQs
Do you remove the old fittings in Balsham?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
Who does the work in Balsham?
Work is carried out by vetted electricians working under S&K Property Investments and Improvement Ltd, which is responsible for the job and invoices you directly.
Do you cover all of Balsham?
Yes. We work across Balsham and the CB21 postcode district, plus nearby places such as Fulbourn, Haverhill and Little Shelford.
What does an LED upgrade cost?
As a budget, LED panels run at about £50–£150 per fitting supplied and installed, battens £80–£200 and high bays £150–£400, excluding VAT. Access equipment, rewiring and controls are extra.
LED lighting upgrades near Balsham
- LED lighting upgrades in Fulbourn
- LED lighting upgrades in Haverhill
- LED lighting upgrades in Little Shelford
- LED lighting upgrades in Great Shelford
- LED lighting upgrades in Saffron Walden
- LED lighting upgrades in Stow cum Quy