LED lighting upgrades in Cambridge
What we do in Cambridge: swap fluorescent, halogen and metal halide fittings for efficient LED. Old tubes are hazardous waste. Our teams working in Cambridge bag and recycle them through an authorised route and give you the paperwork.

Local LED lighting upgrades in Cambridge
In Cambridge warehouses and workshops the biggest savings come from swapping metal halide high bays for LED, where a 400 W lamp plus gear can often be replaced by a fitting drawing 150 W or less.
Where ceilings in Cambridge offices are being replaced anyway, we plan the new LED layout to BS EN 12464-1 rather than simply copying the old positions.
We cover the whole of Cambridge, including the CB2, CB4 and CB1 postcode districts, and nearby places such as Great Shelford, Impington and Fulbourn.
Cambridge at a glance
What's included
- Safe removal and recycling of old fluorescent tubes as hazardous waste
- Like-for-like or re-planned layouts so light levels meet BS EN 12464-1
- Complete LED luminaires rather than tube swaps, so old control gear is removed
- Optional presence and daylight sensors to cut running hours further
Guide prices in Cambridge
Typical budgets for Cambridge premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £50 – £155 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £205 | per fitting, supplied and fitted |
| LED high bay | £155 – £410 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
Example: 40 LED panels replacing fluorescent fittings in a 400 m² office, about £2,050 – £6,200 excluding VAT. Fixed price after a free survey.
Rules that apply in Cambridge
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Cambridge FAQs
Who does the work in Cambridge?
Work is carried out by vetted electricians working under S&K Property Investments and Improvement Ltd, which is responsible for the job and invoices you directly.
How quickly can you survey in Cambridge?
Most surveys in Cambridge can be booked within a few working days. Tell us about any deadlines, such as a lease end or a fire risk assessment action, and we will try to fit around them.
Which rules apply to lighting work in Cambridge?
Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
How long does an office LED upgrade take?
A typical 400 m² office with around 40 fittings is often a one- or two-day job. Larger sites are phased zone by zone, and we can work evenings or weekends.
LED lighting upgrades near Cambridge
- LED lighting upgrades in Great Shelford
- LED lighting upgrades in Impington
- LED lighting upgrades in Fulbourn
- LED lighting upgrades in Hardwick
- LED lighting upgrades in Stow cum Quy
- LED lighting upgrades in Little Shelford