LED lighting upgrades in Long Eaton
Swap fluorescent, halogen and metal halide fittings for efficient LED. Available across Long Eaton and Derbyshire. Where ceilings in Long Eaton offices are being replaced anyway, we plan the new LED layout to BS EN 12464-1 rather than simply copying the old positions.
Local LED lighting upgrades in Long Eaton
In Long Eaton warehouses and workshops the biggest savings come from swapping metal halide high bays for LED, where a 400 W lamp plus gear can often be replaced by a fitting drawing 150 W or less.
For an LED upgrade in Long Eaton we start by counting fittings and running hours, because payback depends far more on how long lights are on than on the price of the fittings.
We cover the whole of Long Eaton, including the NG10, NG9 and DE72 postcode districts, and nearby places such as Beeston, Draycott and Clifton.
Long Eaton at a glance
What's included
- A walk-round survey counting fittings, wattages, running hours and ceiling types
- Like-for-like or re-planned layouts so light levels meet BS EN 12464-1
- Testing and a BS 7671 certificate for the work, with a schedule of what was fitted
- Safe removal and recycling of old fluorescent tubes as hazardous waste
Guide prices in Long Eaton
Typical budgets for Long Eaton premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £50 – £145 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £195 | per fitting, supplied and fitted |
| LED high bay | £145 – £390 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
Example: 40 LED panels replacing fluorescent fittings in a 400 m² office, about £1,950 – £5,900 excluding VAT. Fixed price after a free survey.
Rules that apply in Long Eaton
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Privately rented commercial property in England generally needs an EPC of E or better, or a registered exemption, and lighting is one of the cheaper ways to improve a rating.
Long Eaton FAQs
Do you cover all of Long Eaton?
Yes. We work across Long Eaton and the NG10, NG9 and DE72 postcode districts, plus nearby places such as Beeston, Draycott and Clifton.
Is the price fixed?
Yes. After the survey you get a fixed price for the scope agreed. If you add to the scope later, we price the extra before doing it.
Which rules apply to lighting work in Long Eaton?
Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
How long does an office LED upgrade take?
A typical 400 m² office with around 40 fittings is often a one- or two-day job. Larger sites are phased zone by zone, and we can work evenings or weekends.
LED lighting upgrades near Long Eaton
- LED lighting upgrades in Beeston
- LED lighting upgrades in Draycott
- LED lighting upgrades in Clifton
- LED lighting upgrades in Lockington
- LED lighting upgrades in Ilkeston
- LED lighting upgrades in Basford