LED lighting upgrades in Kingsbridge
In short: swap fluorescent, halogen and metal halide fittings for efficient LED. We quote Kingsbridge LED upgrades as a fixed price with a fitting schedule, so you can see exactly what is being replaced, where, and what it should save.
Local LED lighting upgrades in Kingsbridge
Where ceilings in Kingsbridge offices are being replaced anyway, we plan the new LED layout to BS EN 12464-1 rather than simply copying the old positions.
In Kingsbridge warehouses and workshops the biggest savings come from swapping metal halide high bays for LED, where a 400 W lamp plus gear can often be replaced by a fitting drawing 150 W or less.
We cover the whole of Kingsbridge, including the TQ7 and TQ8 postcode districts, and nearby places such as Salcombe, Ivybridge and Dartmouth.
Kingsbridge at a glance
What's included
- A walk-round survey counting fittings, wattages, running hours and ceiling types
- Safe removal and recycling of old fluorescent tubes as hazardous waste
- Testing and a BS 7671 certificate for the work, with a schedule of what was fitted
- Complete LED luminaires rather than tube swaps, so old control gear is removed
Guide prices in Kingsbridge
Typical budgets for Kingsbridge premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £50 – £155 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £205 | per fitting, supplied and fitted |
| LED high bay | £155 – £410 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
Example: 40 LED panels replacing fluorescent fittings in a 400 m² office, about £2,050 – £6,100 excluding VAT. Fixed price after a free survey.
Rules that apply in Kingsbridge
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Privately rented commercial property in England generally needs an EPC of E or better, or a registered exemption, and lighting is one of the cheaper ways to improve a rating.
Kingsbridge FAQs
How quickly can you survey in Kingsbridge?
Most surveys in Kingsbridge can be booked within a few working days. Tell us about any deadlines, such as a lease end or a fire risk assessment action, and we will try to fit around them.
Which rules apply to lighting work in Kingsbridge?
Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
Do you remove the old fittings in Kingsbridge?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
How long does an office LED upgrade take?
A typical 400 m² office with around 40 fittings is often a one- or two-day job. Larger sites are phased zone by zone, and we can work evenings or weekends.
LED lighting upgrades near Kingsbridge
- LED lighting upgrades in Salcombe
- LED lighting upgrades in Ivybridge
- LED lighting upgrades in Dartmouth
- LED lighting upgrades in South Brent
- LED lighting upgrades in Totnes
- LED lighting upgrades in Yealmpton