LED lighting upgrades in Lyme Regis
In short: swap fluorescent, halogen and metal halide fittings for efficient LED. For an LED upgrade in Lyme Regis we start by counting fittings and running hours, because payback depends far more on how long lights are on than on the price of the fittings.
Local LED lighting upgrades in Lyme Regis
Spare fluorescent tubes are getting harder to buy since the 2023–24 phase-out, which is why many sites in Lyme Regis now upgrade a floor or a unit at a time rather than waiting for failures.
An LED upgrade in Lyme Regis is also the cheapest moment to add presence or daylight sensors, because the electrician is already working on every fitting.
Lyme Regis is a smaller town, covered by postcode district DT7. We regularly work across Dorset, so access, parking and out-of-hours working are planned before we arrive.
Lyme Regis at a glance
What's included
- Optional presence and daylight sensors to cut running hours further
- A walk-round survey counting fittings, wattages, running hours and ceiling types
- Testing and a BS 7671 certificate for the work, with a schedule of what was fitted
- Complete LED luminaires rather than tube swaps, so old control gear is removed
Guide prices in Lyme Regis
Typical budgets for Lyme Regis premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £50 – £155 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £205 | per fitting, supplied and fitted |
| LED high bay | £155 – £410 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
Example: 40 LED panels replacing fluorescent fittings in a 400 m² office, about £2,050 – £6,100 excluding VAT. Fixed price after a free survey.
Rules that apply in Lyme Regis
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Privately rented commercial property in England generally needs an EPC of E or better, or a registered exemption, and lighting is one of the cheaper ways to improve a rating.
Lyme Regis FAQs
Do you remove the old fittings in Lyme Regis?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
How quickly can you survey in Lyme Regis?
Most surveys in Lyme Regis can be booked within a few working days. Tell us about any deadlines, such as a lease end or a fire risk assessment action, and we will try to fit around them.
Which rules apply to lighting work in Lyme Regis?
Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
Do you just change the tubes?
We recommend replacing the whole luminaire. Retrofit LED tubes leave old ballasts and holders in place, which can fail and complicate future maintenance. A complete fitting is cleaner, more efficient and simpler to certify.
LED lighting upgrades near Lyme Regis
- LED lighting upgrades in Axminster
- LED lighting upgrades in Seaton
- LED lighting upgrades in Colyton
- LED lighting upgrades in Allington
- LED lighting upgrades in Chard
- LED lighting upgrades in Beaminster