LED lighting upgrades in Portland
In short: swap fluorescent, halogen and metal halide fittings for efficient LED. We quote Portland LED upgrades as a fixed price with a fitting schedule, so you can see exactly what is being replaced, where, and what it should save.
Local LED lighting upgrades in Portland
In Portland warehouses and workshops the biggest savings come from swapping metal halide high bays for LED, where a 400 W lamp plus gear can often be replaced by a fitting drawing 150 W or less.
Most Portland businesses we survey still have a mix of T8 battens, 600×600 fluorescent panels and the odd halogen downlight. Replacing them with complete LED luminaires usually cuts lighting energy by a third to a half.
We cover the whole of Portland, including the DT5 postcode district, and nearby places such as Weymouth, Dorchester and Charminster.
Portland at a glance
What's included
- A walk-round survey counting fittings, wattages, running hours and ceiling types
- Safe removal and recycling of old fluorescent tubes as hazardous waste
- Like-for-like or re-planned layouts so light levels meet BS EN 12464-1
- Testing and a BS 7671 certificate for the work, with a schedule of what was fitted
Guide prices in Portland
Typical budgets for Portland premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £50 – £155 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £205 | per fitting, supplied and fitted |
| LED high bay | £155 – £410 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
Example: 40 LED panels replacing fluorescent fittings in a 400 m² office, about £2,050 – £6,100 excluding VAT. Fixed price after a free survey.
Rules that apply in Portland
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Privately rented commercial property in England generally needs an EPC of E or better, or a registered exemption, and lighting is one of the cheaper ways to improve a rating.
Portland FAQs
How quickly can you survey in Portland?
Most surveys in Portland can be booked within a few working days. Tell us about any deadlines, such as a lease end or a fire risk assessment action, and we will try to fit around them.
Which rules apply to lighting work in Portland?
Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
Who does the work in Portland?
Work is carried out by vetted electricians working under S&K Property Investments and Improvement Ltd, which is responsible for the job and invoices you directly.
How long does an office LED upgrade take?
A typical 400 m² office with around 40 fittings is often a one- or two-day job. Larger sites are phased zone by zone, and we can work evenings or weekends.
LED lighting upgrades near Portland
- LED lighting upgrades in Weymouth
- LED lighting upgrades in Dorchester
- LED lighting upgrades in Charminster
- LED lighting upgrades in Wareham
- LED lighting upgrades in Allington
- LED lighting upgrades in Swanage