LED lighting upgrades in Barmby Moor
Swap fluorescent, halogen and metal halide fittings for efficient LED. Available across Barmby Moor and the East Riding of Yorkshire. In Barmby Moor warehouses and workshops the biggest savings come from swapping metal halide high bays for LED, where a 400 W lamp plus gear can often be replaced by a fitting drawing 150 W or less.
Local LED lighting upgrades in Barmby Moor
We quote Barmby Moor LED upgrades as a fixed price with a fitting schedule, so you can see exactly what is being replaced, where, and what it should save.
Old tubes are hazardous waste. Our teams working in Barmby Moor bag and recycle them through an authorised route and give you the paperwork.
Our teams travel to Barmby Moor from across the East Riding of Yorkshire. Typical nearby jobs include Catton, Market Weighton and Wheldrake, so we can often combine survey visits.
Barmby Moor at a glance
What's included
- Complete LED luminaires rather than tube swaps, so old control gear is removed
- Safe removal and recycling of old fluorescent tubes as hazardous waste
- A walk-round survey counting fittings, wattages, running hours and ceiling types
- Optional presence and daylight sensors to cut running hours further
Guide prices in Barmby Moor
Typical budgets for Barmby Moor premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £50 – £145 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £195 | per fitting, supplied and fitted |
| LED high bay | £145 – £390 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
Example: 40 LED panels replacing fluorescent fittings in a 400 m² office, about £1,950 – £5,800 excluding VAT. Fixed price after a free survey.
Rules that apply in Barmby Moor
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Privately rented commercial property in England generally needs an EPC of E or better, or a registered exemption, and lighting is one of the cheaper ways to improve a rating.
Barmby Moor FAQs
Is the price fixed?
Yes. After the survey you get a fixed price for the scope agreed. If you add to the scope later, we price the extra before doing it.
How quickly can you survey in Barmby Moor?
Most surveys in Barmby Moor can be booked within a few working days. Tell us about any deadlines, such as a lease end or a fire risk assessment action, and we will try to fit around them.
Which rules apply to lighting work in Barmby Moor?
Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
What does an LED upgrade cost?
As a budget, LED panels run at about £50–£150 per fitting supplied and installed, battens £80–£200 and high bays £150–£400, excluding VAT. Access equipment, rewiring and controls are extra.
LED lighting upgrades near Barmby Moor
- LED lighting upgrades in Catton
- LED lighting upgrades in Market Weighton
- LED lighting upgrades in Wheldrake
- LED lighting upgrades in York
- LED lighting upgrades in Earswick
- LED lighting upgrades in Thornton-le-Clay