LED lighting upgrades in Livingston
What we do in Livingston: swap fluorescent, halogen and metal halide fittings for efficient LED. Spare fluorescent tubes are getting harder to buy since the 2023–24 phase-out, which is why many sites in Livingston now upgrade a floor or a unit at a time rather than waiting for failures.
Local LED lighting upgrades in Livingston
For an LED upgrade in Livingston we start by counting fittings and running hours, because payback depends far more on how long lights are on than on the price of the fittings.
In Livingston warehouses and workshops the biggest savings come from swapping metal halide high bays for LED, where a 400 W lamp plus gear can often be replaced by a fitting drawing 150 W or less.
Livingston is a town with plenty of offices, shops and units, covered by postcode districts EH54, EH53 and EH52. We regularly work across Edinburgh and the Lothians, so access, parking and out-of-hours working are planned before we arrive.
Livingston at a glance
What's included
- Safe removal and recycling of old fluorescent tubes as hazardous waste
- Optional presence and daylight sensors to cut running hours further
- Complete LED luminaires rather than tube swaps, so old control gear is removed
- Testing and a BS 7671 certificate for the work, with a schedule of what was fitted
Guide prices in Livingston
Typical budgets for Livingston premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £50 – £150 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £200 | per fitting, supplied and fitted |
| LED high bay | £150 – £400 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
Example: 40 LED panels replacing fluorescent fittings in a 400 m² office, about £2,000 – £6,000 excluding VAT. Fixed price after a free survey.
Rules that apply in Livingston
Standard 6.5 of the Scottish building standards covers efficient, controllable lighting. The non-domestic guidance uses 95 luminaire lumens per circuit-watt for general lighting, or LENI.
In Great Britain, including Scotland, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Livingston FAQs
Who does the work in Livingston?
Work is carried out by vetted electricians working under S&K Property Investments and Improvement Ltd, which is responsible for the job and invoices you directly.
How quickly can you survey in Livingston?
Most surveys in Livingston can be booked within a few working days. Tell us about any deadlines, such as a lease end or a fire risk assessment action, and we will try to fit around them.
Do you remove the old fittings in Livingston?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
Do you just change the tubes?
We recommend replacing the whole luminaire. Retrofit LED tubes leave old ballasts and holders in place, which can fail and complicate future maintenance. A complete fitting is cleaner, more efficient and simpler to certify.
LED lighting upgrades near Livingston
- LED lighting upgrades in Broxburn
- LED lighting upgrades in Kirknewton
- LED lighting upgrades in West Calder
- LED lighting upgrades in Bathgate
- LED lighting upgrades in Newbridge and Ratho
- LED lighting upgrades in Linlithgow