COMMERCIALLighting.uk

LED lighting upgrades in Morningside, Braid Hill and Swanston

If your premises in Morningside, Braid Hill and Swanston need LED lighting upgrades, we can usually survey within days. Work is carried out by vetted electricians working under S&K and certified on completion.

LED lighting upgrades in Morningside, Braid Hill and Swanston

Swap fluorescent, halogen and metal halide fittings for efficient LED. Available across Morningside, Braid Hill and Swanston and Edinburgh and the Lothians. In Morningside, Braid Hill and Swanston warehouses and workshops the biggest savings come from swapping metal halide high bays for LED, where a 400 W lamp plus gear can often be replaced by a fitting drawing 150 W or less.

Electrician fitting a new LED panel into an office ceiling grid

Local LED lighting upgrades in Morningside, Braid Hill and Swanston

Old tubes are hazardous waste. Our teams working in Morningside, Braid Hill and Swanston bag and recycle them through an authorised route and give you the paperwork.

Most Morningside, Braid Hill and Swanston businesses we survey still have a mix of T8 battens, 600×600 fluorescent panels and the odd halogen downlight. Replacing them with complete LED luminaires usually cuts lighting energy by a third to a half.

Our teams travel to Morningside, Braid Hill and Swanston from across Edinburgh and the Lothians. Typical nearby jobs include Gorgie, Stenhouse and Sighthill, Liberton and Craigmillar and Edinburgh, so we can often combine survey visits.

Morningside, Braid Hill and Swanston at a glance

AreaEdinburgh and the Lothians
Postcode districtsEH10, EH9, EH13, EH11
NearbyGorgie, Stenhouse and Sighthill, Liberton and Craigmillar and Edinburgh
RulesScottish fire safety law; Section 6 of the Scottish building standards

What's included

  • Optional presence and daylight sensors to cut running hours further
  • Testing and a BS 7671 certificate for the work, with a schedule of what was fitted
  • Complete LED luminaires rather than tube swaps, so old control gear is removed
  • Safe removal and recycling of old fluorescent tubes as hazardous waste

Guide prices in Morningside, Braid Hill and Swanston

Typical budgets for Morningside, Braid Hill and Swanston premises, supplied and installed, excluding VAT.

Guide prices in Morningside, Braid Hill and Swanston
ItemGuide budget (ex VAT)Basis
LED panel (600×600)£50 – £150per fitting, supplied and fitted
LED batten (complete luminaire)£80 – £200per fitting, supplied and fitted
LED high bay£150 – £400per fitting, supplied and fitted
Presence (PIR) sensor£40 – £80per sensor, installed

Example: 40 LED panels replacing fluorescent fittings in a 400 m² office, about £2,000 – £6,000 excluding VAT. Fixed price after a free survey.

Rules that apply in Morningside, Braid Hill and Swanston

Standard 6.5 of the Scottish building standards covers efficient, controllable lighting. The non-domestic guidance uses 95 luminaire lumens per circuit-watt for general lighting, or LENI.

In Great Britain, including Scotland, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.

Scotland does not use the England and Wales EPC E letting rule. Instead, some non-domestic buildings over 1,000 m² need an action plan when sold or let, under Section 63 regulations.

Morningside, Braid Hill and Swanston FAQs

Which rules apply to lighting work in Morningside, Braid Hill and Swanston?

Fire safety duties come from the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006. For new lighting, Section 6 of the Scottish building standards sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.

Who does the work in Morningside, Braid Hill and Swanston?

Work is carried out by vetted electricians working under S&K Property Investments and Improvement Ltd, which is responsible for the job and invoices you directly.

Is the price fixed?

Yes. After the survey you get a fixed price for the scope agreed. If you add to the scope later, we price the extra before doing it.

What does an LED upgrade cost?

As a budget, LED panels run at about £50–£150 per fitting supplied and installed, battens £80–£200 and high bays £150–£400, excluding VAT. Access equipment, rewiring and controls are extra.

LED lighting upgrades near Morningside, Braid Hill and Swanston

Other lighting services in Morningside, Braid Hill and Swanston

Get a fixed-price lighting quote

Free survey, clear scope, certified work. Prices exclude VAT.