LED lighting upgrades in Enfield
In short: swap fluorescent, halogen and metal halide fittings for efficient LED. For an LED upgrade in Enfield we start by counting fittings and running hours, because payback depends far more on how long lights are on than on the price of the fittings.
Local LED lighting upgrades in Enfield
In Enfield warehouses and workshops the biggest savings come from swapping metal halide high bays for LED, where a 400 W lamp plus gear can often be replaced by a fitting drawing 150 W or less.
Old tubes are hazardous waste. Our teams working in Enfield bag and recycle them through an authorised route and give you the paperwork.
We cover the whole of Enfield, including the EN2, EN1 and N21 postcode districts, and nearby places such as Ponders End, Edmonton and Palmers Green.
Enfield at a glance
What's included
- Optional presence and daylight sensors to cut running hours further
- Testing and a BS 7671 certificate for the work, with a schedule of what was fitted
- Like-for-like or re-planned layouts so light levels meet BS EN 12464-1
- A walk-round survey counting fittings, wattages, running hours and ceiling types
Guide prices in Enfield
Typical budgets for Enfield premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £55 – £175 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £90 – £230 | per fitting, supplied and fitted |
| LED high bay | £175 – £460 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £45 – £90 | per sensor, installed |
Example: 40 LED panels replacing fluorescent fittings in a 400 m² office, about £2,300 – £6,900 excluding VAT. Fixed price after a free survey.
Rules that apply in Enfield
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Privately rented commercial property in England generally needs an EPC of E or better, or a registered exemption, and lighting is one of the cheaper ways to improve a rating.
Enfield FAQs
Can you work out of hours in Enfield?
Yes. Evening, weekend and phased working is common for Enfield offices, shops and warehouses, so the business keeps running.
Do you remove the old fittings in Enfield?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
Which rules apply to lighting work in Enfield?
Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
How long does an office LED upgrade take?
A typical 400 m² office with around 40 fittings is often a one- or two-day job. Larger sites are phased zone by zone, and we can work evenings or weekends.
LED lighting upgrades near Enfield
- LED lighting upgrades in Ponders End
- LED lighting upgrades in Edmonton
- LED lighting upgrades in Palmers Green
- LED lighting upgrades in Enfield Lock
- LED lighting upgrades in East Barnet
- LED lighting upgrades in Tottenham