LED lighting upgrades in Hook
In short: swap fluorescent, halogen and metal halide fittings for efficient LED. We quote Hook LED upgrades as a fixed price with a fitting schedule, so you can see exactly what is being replaced, where, and what it should save.
Local LED lighting upgrades in Hook
For an LED upgrade in Hook we start by counting fittings and running hours, because payback depends far more on how long lights are on than on the price of the fittings.
In Hook warehouses and workshops the biggest savings come from swapping metal halide high bays for LED, where a 400 W lamp plus gear can often be replaced by a fitting drawing 150 W or less.
We cover the whole of Hook, including the RG27 and RG29 postcode districts, and nearby places such as Odiham, Fleet and Yateley.
Hook at a glance
What's included
- Complete LED luminaires rather than tube swaps, so old control gear is removed
- Like-for-like or re-planned layouts so light levels meet BS EN 12464-1
- Testing and a BS 7671 certificate for the work, with a schedule of what was fitted
- Optional presence and daylight sensors to cut running hours further
Guide prices in Hook
Typical budgets for Hook premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £55 – £160 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £85 – £215 | per fitting, supplied and fitted |
| LED high bay | £160 – £430 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £45 – £85 | per sensor, installed |
Example: 40 LED panels replacing fluorescent fittings in a 400 m² office, about £2,150 – £6,400 excluding VAT. Fixed price after a free survey.
Rules that apply in Hook
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Privately rented commercial property in England generally needs an EPC of E or better, or a registered exemption, and lighting is one of the cheaper ways to improve a rating.
Hook FAQs
Which rules apply to lighting work in Hook?
Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
Can you work out of hours in Hook?
Yes. Evening, weekend and phased working is common for Hook offices, shops and warehouses, so the business keeps running.
How quickly can you survey in Hook?
Most surveys in Hook can be booked within a few working days. Tell us about any deadlines, such as a lease end or a fire risk assessment action, and we will try to fit around them.
How long does an office LED upgrade take?
A typical 400 m² office with around 40 fittings is often a one- or two-day job. Larger sites are phased zone by zone, and we can work evenings or weekends.
LED lighting upgrades near Hook
- LED lighting upgrades in Odiham
- LED lighting upgrades in Fleet
- LED lighting upgrades in Yateley
- LED lighting upgrades in Basingstoke
- LED lighting upgrades in Sandhurst
- LED lighting upgrades in Farnborough