LED lighting upgrades in Toab
In short: swap fluorescent, halogen and metal halide fittings for efficient LED. For an LED upgrade in Toab we start by counting fittings and running hours, because payback depends far more on how long lights are on than on the price of the fittings.

Local LED lighting upgrades in Toab
An LED upgrade in Toab is also the cheapest moment to add presence or daylight sensors, because the electrician is already working on every fitting.
Spare fluorescent tubes are getting harder to buy since the 2023–24 phase-out, which is why many sites in Toab now upgrade a floor or a unit at a time rather than waiting for failures.
Toab sits within the Highlands and Islands. We work throughout the ZE3 postcode district and surrounding places, including Lerwick.
We cover Toab by arrangement. Because of travel and access, visits are usually grouped with other work in the Highlands and Islands, so please allow more time for a survey and tell us about any ferry or access constraints.
Toab at a glance
What's included
- Optional presence and daylight sensors to cut running hours further
- Safe removal and recycling of old fluorescent tubes as hazardous waste
- Like-for-like or re-planned layouts so light levels meet BS EN 12464-1
- Complete LED luminaires rather than tube swaps, so old control gear is removed
Guide prices in Toab
Typical budgets for Toab premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £50 – £150 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £200 | per fitting, supplied and fitted |
| LED high bay | £150 – £400 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
Example: 40 LED panels replacing fluorescent fittings in a 400 m² office, about £2,000 – £6,000 excluding VAT. Fixed price after a free survey.
Rules that apply in Toab
Standard 6.5 of the Scottish building standards covers efficient, controllable lighting. The non-domestic guidance uses 95 luminaire lumens per circuit-watt for general lighting, or LENI.
In Great Britain, including Scotland, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Scotland does not use the England and Wales EPC E letting rule. Instead, some non-domestic buildings over 1,000 m² need an action plan when sold or let, under Section 63 regulations.
Toab FAQs
Is the price fixed?
Yes. After the survey you get a fixed price for the scope agreed. If you add to the scope later, we price the extra before doing it.
Which rules apply to lighting work in Toab?
Fire safety duties come from the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006. For new lighting, Section 6 of the Scottish building standards sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
Who does the work in Toab?
Work is carried out by vetted electricians working under S&K Property Investments and Improvement Ltd, which is responsible for the job and invoices you directly.
Is it worth replacing fluorescent tubes with LED?
Usually, yes. Common T8 fluorescent tubes were caught by GB ecodesign rules from September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended in February 2024, so replacements are getting harder to source. LED fittings typically use 30–60% less energy for the same light.