LED lighting upgrades in Gillingham
Swap fluorescent, halogen and metal halide fittings for efficient LED. Available across Gillingham and Kent. In Gillingham warehouses and workshops the biggest savings come from swapping metal halide high bays for LED, where a 400 W lamp plus gear can often be replaced by a fitting drawing 150 W or less.
Local LED lighting upgrades in Gillingham
For an LED upgrade in Gillingham we start by counting fittings and running hours, because payback depends far more on how long lights are on than on the price of the fittings.
Most Gillingham businesses we survey still have a mix of T8 battens, 600×600 fluorescent panels and the odd halogen downlight. Replacing them with complete LED luminaires usually cuts lighting energy by a third to a half.
Our teams travel to Gillingham from across Kent. Typical nearby jobs include Chatham, Rochester and Hoo St Werburgh, so we can often combine survey visits.
Gillingham at a glance
What's included
- Complete LED luminaires rather than tube swaps, so old control gear is removed
- Testing and a BS 7671 certificate for the work, with a schedule of what was fitted
- Optional presence and daylight sensors to cut running hours further
- Like-for-like or re-planned layouts so light levels meet BS EN 12464-1
Guide prices in Gillingham
Typical budgets for Gillingham premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £55 – £160 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £85 – £215 | per fitting, supplied and fitted |
| LED high bay | £160 – £430 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £45 – £85 | per sensor, installed |
Example: 40 LED panels replacing fluorescent fittings in a 400 m² office, about £2,150 – £6,400 excluding VAT. Fixed price after a free survey.
Rules that apply in Gillingham
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Privately rented commercial property in England generally needs an EPC of E or better, or a registered exemption, and lighting is one of the cheaper ways to improve a rating.
Gillingham FAQs
Who does the work in Gillingham?
Work is carried out by vetted electricians working under S&K Property Investments and Improvement Ltd, which is responsible for the job and invoices you directly.
Do you cover all of Gillingham?
Yes. We work across Gillingham and the ME7, ME4 and ME1 postcode districts, plus nearby places such as Chatham, Rochester and Hoo St Werburgh.
Which rules apply to lighting work in Gillingham?
Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
What does an LED upgrade cost?
As a budget, LED panels run at about £50–£150 per fitting supplied and installed, battens £80–£200 and high bays £150–£400, excluding VAT. Access equipment, rewiring and controls are extra.
LED lighting upgrades near Gillingham
- LED lighting upgrades in Chatham
- LED lighting upgrades in Rochester
- LED lighting upgrades in Hoo St Werburgh
- LED lighting upgrades in Strood
- LED lighting upgrades in Snodland
- LED lighting upgrades in Ditton