LED lighting upgrades in Ulceby
What we do in Ulceby: swap fluorescent, halogen and metal halide fittings for efficient LED. Old tubes are hazardous waste. Our teams working in Ulceby bag and recycle them through an authorised route and give you the paperwork.
Local LED lighting upgrades in Ulceby
Most Ulceby businesses we survey still have a mix of T8 battens, 600×600 fluorescent panels and the odd halogen downlight. Replacing them with complete LED luminaires usually cuts lighting energy by a third to a half.
For an LED upgrade in Ulceby we start by counting fittings and running hours, because payback depends far more on how long lights are on than on the price of the fittings.
We cover the whole of Ulceby, including the DN39 postcode district, and nearby places such as Bigby, Immingham and Barrow-Upon-Humber.
Ulceby at a glance
What's included
- Like-for-like or re-planned layouts so light levels meet BS EN 12464-1
- Complete LED luminaires rather than tube swaps, so old control gear is removed
- Safe removal and recycling of old fluorescent tubes as hazardous waste
- Testing and a BS 7671 certificate for the work, with a schedule of what was fitted
Guide prices in Ulceby
Typical budgets for Ulceby premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £50 – £145 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £195 | per fitting, supplied and fitted |
| LED high bay | £145 – £390 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
Example: 40 LED panels replacing fluorescent fittings in a 400 m² office, about £1,950 – £5,800 excluding VAT. Fixed price after a free survey.
Rules that apply in Ulceby
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Ulceby FAQs
Who does the work in Ulceby?
Work is carried out by vetted electricians working under S&K Property Investments and Improvement Ltd, which is responsible for the job and invoices you directly.
Do you remove the old fittings in Ulceby?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
Do you cover all of Ulceby?
Yes. We work across Ulceby and the DN39 postcode district, plus nearby places such as Bigby, Immingham and Barrow-Upon-Humber.
How long does an office LED upgrade take?
A typical 400 m² office with around 40 fittings is often a one- or two-day job. Larger sites are phased zone by zone, and we can work evenings or weekends.
LED lighting upgrades near Ulceby
- LED lighting upgrades in Bigby
- LED lighting upgrades in Immingham
- LED lighting upgrades in Barrow-Upon-Humber
- LED lighting upgrades in Stallingborough
- LED lighting upgrades in Barton-Upon-Humber
- LED lighting upgrades in Broughton