LED lighting upgrades in Moray
A commercial LED lighting upgrade replaces old fluorescent, halogen, metal halide or sodium fittings with complete LED luminaires, usually on the existing circuits. We cover Moray, including Elgin, Aberlour and Ballindalloch.
LED lighting upgrades work in Moray
We quote Moray LED upgrades as a fixed price with a fitting schedule, so you can see exactly what is being replaced, where, and what it should save.
Most Moray businesses we survey still have a mix of T8 battens, 600×600 fluorescent panels and the odd halogen downlight. Replacing them with complete LED luminaires usually cuts lighting energy by a third to a half.
We cover Moray by arrangement. Because of travel and access, visits are usually grouped with other work in Moray, so please allow more time for a survey and tell us about any ferry or access constraints.
What's included
- A walk-round survey counting fittings, wattages, running hours and ceiling types
- Optional presence and daylight sensors to cut running hours further
- Testing and a BS 7671 certificate for the work, with a schedule of what was fitted
- Complete LED luminaires rather than tube swaps, so old control gear is removed
Guide prices in Moray
Typical budgets for Moray, supplied and installed, excluding VAT. Your fixed price follows a free survey.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £50 – £150 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £200 | per fitting, supplied and fitted |
| LED high bay | £150 – £400 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
Example: 40 LED panels replacing fluorescent fittings in a 400 m² office, about £2,000 – £6,000 excluding VAT.
Rules that apply in Moray
Standard 6.5 of the Scottish building standards covers efficient, controllable lighting. The non-domestic guidance uses 95 luminaire lumens per circuit-watt for general lighting, or LENI.
In Great Britain, including Scotland, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Scotland does not use the England and Wales EPC E letting rule. Instead, some non-domestic buildings over 1,000 m² need an action plan when sold or let, under Section 63 regulations.
LED lighting upgrades by town in Moray
- LED lighting upgrades in Elgin
- LED lighting upgrades in Aberlour
- LED lighting upgrades in Ballindalloch
- LED lighting upgrades in Buckie
- LED lighting upgrades in Forres
- LED lighting upgrades in Keith
- LED lighting upgrades in Lossiemouth
- LED lighting upgrades in Mosstodloch
LED lighting upgrades FAQs for Moray
Which fire safety law applies in Moray?
The Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 sets the duties of the person responsible for fire safety, including emergency lighting where escape routes need it.
How are prices set in Moray?
Our guide prices are adjusted for regional labour costs. After a survey you get a fixed price for the agreed scope.
Is it worth replacing fluorescent tubes with LED?
Usually, yes. Common T8 fluorescent tubes were caught by GB ecodesign rules from September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended in February 2024, so replacements are getting harder to source. LED fittings typically use 30–60% less energy for the same light.
Do you just change the tubes?
We recommend replacing the whole luminaire. Retrofit LED tubes leave old ballasts and holders in place, which can fail and complicate future maintenance. A complete fitting is cleaner, more efficient and simpler to certify.