LED lighting upgrades in Tansor
Swap fluorescent, halogen and metal halide fittings for efficient LED. Available across Tansor and Northamptonshire. Where ceilings in Tansor offices are being replaced anyway, we plan the new LED layout to BS EN 12464-1 rather than simply copying the old positions.
Local LED lighting upgrades in Tansor
For an LED upgrade in Tansor we start by counting fittings and running hours, because payback depends far more on how long lights are on than on the price of the fittings.
In Tansor warehouses and workshops the biggest savings come from swapping metal halide high bays for LED, where a 400 W lamp plus gear can often be replaced by a fitting drawing 150 W or less.
Tansor sits within Northamptonshire. We work throughout the PE8 postcode district and surrounding places, including Ailsworth, Stamford and Peterborough.
Tansor at a glance
What's included
- Optional presence and daylight sensors to cut running hours further
- Complete LED luminaires rather than tube swaps, so old control gear is removed
- Like-for-like or re-planned layouts so light levels meet BS EN 12464-1
- A walk-round survey counting fittings, wattages, running hours and ceiling types
Guide prices in Tansor
Typical budgets for Tansor premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £50 – £145 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £195 | per fitting, supplied and fitted |
| LED high bay | £145 – £390 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
Example: 40 LED panels replacing fluorescent fittings in a 400 m² office, about £1,950 – £5,900 excluding VAT. Fixed price after a free survey.
Rules that apply in Tansor
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Privately rented commercial property in England generally needs an EPC of E or better, or a registered exemption, and lighting is one of the cheaper ways to improve a rating.
Tansor FAQs
Do you remove the old fittings in Tansor?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
How quickly can you survey in Tansor?
Most surveys in Tansor can be booked within a few working days. Tell us about any deadlines, such as a lease end or a fire risk assessment action, and we will try to fit around them.
Is the price fixed?
Yes. After the survey you get a fixed price for the scope agreed. If you add to the scope later, we price the extra before doing it.
Is it worth replacing fluorescent tubes with LED?
Usually, yes. Common T8 fluorescent tubes were caught by GB ecodesign rules from September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended in February 2024, so replacements are getting harder to source. LED fittings typically use 30–60% less energy for the same light.
LED lighting upgrades near Tansor
- LED lighting upgrades in Ailsworth
- LED lighting upgrades in Stamford
- LED lighting upgrades in Peterborough
- LED lighting upgrades in Farcet
- LED lighting upgrades in Corby
- LED lighting upgrades in Deeping St James