LED lighting upgrades in Greasley
Swap fluorescent, halogen and metal halide fittings for efficient LED. Available across Greasley and Nottinghamshire. In Greasley warehouses and workshops the biggest savings come from swapping metal halide high bays for LED, where a 400 W lamp plus gear can often be replaced by a fitting drawing 150 W or less.
Local LED lighting upgrades in Greasley
Most Greasley businesses we survey still have a mix of T8 battens, 600×600 fluorescent panels and the odd halogen downlight. Replacing them with complete LED luminaires usually cuts lighting energy by a third to a half.
Old tubes are hazardous waste. Our teams working in Greasley bag and recycle them through an authorised route and give you the paperwork.
Our teams travel to Greasley from across Nottinghamshire. Typical nearby jobs include Eastwood, Heanor and Hucknall, so we can often combine survey visits.
Greasley at a glance
What's included
- Optional presence and daylight sensors to cut running hours further
- Complete LED luminaires rather than tube swaps, so old control gear is removed
- Testing and a BS 7671 certificate for the work, with a schedule of what was fitted
- Safe removal and recycling of old fluorescent tubes as hazardous waste
Guide prices in Greasley
Typical budgets for Greasley premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £50 – £145 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £195 | per fitting, supplied and fitted |
| LED high bay | £145 – £390 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
Example: 40 LED panels replacing fluorescent fittings in a 400 m² office, about £1,950 – £5,900 excluding VAT. Fixed price after a free survey.
Rules that apply in Greasley
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Privately rented commercial property in England generally needs an EPC of E or better, or a registered exemption, and lighting is one of the cheaper ways to improve a rating.
Greasley FAQs
Is the price fixed?
Yes. After the survey you get a fixed price for the scope agreed. If you add to the scope later, we price the extra before doing it.
Which rules apply to lighting work in Greasley?
Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
Who does the work in Greasley?
Work is carried out by vetted electricians working under S&K Property Investments and Improvement Ltd, which is responsible for the job and invoices you directly.
What does an LED upgrade cost?
As a budget, LED panels run at about £50–£150 per fitting supplied and installed, battens £80–£200 and high bays £150–£400, excluding VAT. Access equipment, rewiring and controls are extra.
LED lighting upgrades near Greasley
- LED lighting upgrades in Eastwood
- LED lighting upgrades in Heanor
- LED lighting upgrades in Hucknall
- LED lighting upgrades in Ilkeston
- LED lighting upgrades in Ripley
- LED lighting upgrades in Kirkby in Ashfield