LED lighting upgrades in Ranfurly
Swap fluorescent, halogen and metal halide fittings for efficient LED. An LED upgrade in Ranfurly is also the cheapest moment to add presence or daylight sensors, because the electrician is already working on every fitting.
Local LED lighting upgrades in Ranfurly
Spare fluorescent tubes are getting harder to buy since the 2023–24 phase-out, which is why many sites in Ranfurly now upgrade a floor or a unit at a time rather than waiting for failures.
For an LED upgrade in Ranfurly we start by counting fittings and running hours, because payback depends far more on how long lights are on than on the price of the fittings.
Ranfurly sits within Renfrewshire and Inverclyde. We work throughout the PA11, PA6 and PA10 postcode districts and surrounding places, including Kilmacolm, Johnstone and Howwood.
Ranfurly at a glance
What's included
- Testing and a BS 7671 certificate for the work, with a schedule of what was fitted
- Optional presence and daylight sensors to cut running hours further
- Complete LED luminaires rather than tube swaps, so old control gear is removed
- Safe removal and recycling of old fluorescent tubes as hazardous waste
Guide prices in Ranfurly
Typical budgets for Ranfurly premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £50 – £150 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £200 | per fitting, supplied and fitted |
| LED high bay | £150 – £400 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
Example: 40 LED panels replacing fluorescent fittings in a 400 m² office, about £2,000 – £6,000 excluding VAT. Fixed price after a free survey.
Rules that apply in Ranfurly
Standard 6.5 of the Scottish building standards covers efficient, controllable lighting. The non-domestic guidance uses 95 luminaire lumens per circuit-watt for general lighting, or LENI.
In Great Britain, including Scotland, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Ranfurly FAQs
Do you cover all of Ranfurly?
Yes. We work across Ranfurly and the PA11, PA6 and PA10 postcode districts, plus nearby places such as Kilmacolm, Johnstone and Howwood.
Which rules apply to lighting work in Ranfurly?
Fire safety duties come from the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006. For new lighting, Section 6 of the Scottish building standards sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
Is the price fixed?
Yes. After the survey you get a fixed price for the scope agreed. If you add to the scope later, we price the extra before doing it.
Is it worth replacing fluorescent tubes with LED?
Usually, yes. Common T8 fluorescent tubes were caught by GB ecodesign rules from September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended in February 2024, so replacements are getting harder to source. LED fittings typically use 30–60% less energy for the same light.
LED lighting upgrades near Ranfurly
- LED lighting upgrades in Kilmacolm
- LED lighting upgrades in Johnstone
- LED lighting upgrades in Howwood
- LED lighting upgrades in Linwood
- LED lighting upgrades in Bishopton
- LED lighting upgrades in Lochwinnoch