LED lighting upgrades in Renfrew
Swap fluorescent, halogen and metal halide fittings for efficient LED. Available across Renfrew and Renfrewshire and Inverclyde. Where ceilings in Renfrew offices are being replaced anyway, we plan the new LED layout to BS EN 12464-1 rather than simply copying the old positions.
Local LED lighting upgrades in Renfrew
We quote Renfrew LED upgrades as a fixed price with a fitting schedule, so you can see exactly what is being replaced, where, and what it should save.
In Renfrew warehouses and workshops the biggest savings come from swapping metal halide high bays for LED, where a 400 W lamp plus gear can often be replaced by a fitting drawing 150 W or less.
Our teams travel to Renfrew from across Renfrewshire and Inverclyde. Typical nearby jobs include Clydebank, Erskine and Paisley, so we can often combine survey visits.
Renfrew at a glance
What's included
- Complete LED luminaires rather than tube swaps, so old control gear is removed
- Safe removal and recycling of old fluorescent tubes as hazardous waste
- Like-for-like or re-planned layouts so light levels meet BS EN 12464-1
- Testing and a BS 7671 certificate for the work, with a schedule of what was fitted
Guide prices in Renfrew
Typical budgets for Renfrew premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £50 – £150 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £200 | per fitting, supplied and fitted |
| LED high bay | £150 – £400 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
Example: 40 LED panels replacing fluorescent fittings in a 400 m² office, about £2,000 – £6,000 excluding VAT. Fixed price after a free survey.
Rules that apply in Renfrew
Standard 6.5 of the Scottish building standards covers efficient, controllable lighting. The non-domestic guidance uses 95 luminaire lumens per circuit-watt for general lighting, or LENI.
In Great Britain, including Scotland, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Scotland does not use the England and Wales EPC E letting rule. Instead, some non-domestic buildings over 1,000 m² need an action plan when sold or let, under Section 63 regulations.
Renfrew FAQs
Is the price fixed?
Yes. After the survey you get a fixed price for the scope agreed. If you add to the scope later, we price the extra before doing it.
How quickly can you survey in Renfrew?
Most surveys in Renfrew can be booked within a few working days. Tell us about any deadlines, such as a lease end or a fire risk assessment action, and we will try to fit around them.
Do you remove the old fittings in Renfrew?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
What does an LED upgrade cost?
As a budget, LED panels run at about £50–£150 per fitting supplied and installed, battens £80–£200 and high bays £150–£400, excluding VAT. Access equipment, rewiring and controls are extra.
LED lighting upgrades near Renfrew
- LED lighting upgrades in Clydebank
- LED lighting upgrades in Erskine
- LED lighting upgrades in Paisley
- LED lighting upgrades in Bearsden
- LED lighting upgrades in Linwood
- LED lighting upgrades in Bishopton