LED lighting upgrades in Shepton Mallet
Swap fluorescent, halogen and metal halide fittings for efficient LED. Available across Shepton Mallet and Somerset. Where ceilings in Shepton Mallet offices are being replaced anyway, we plan the new LED layout to BS EN 12464-1 rather than simply copying the old positions.
Local LED lighting upgrades in Shepton Mallet
We quote Shepton Mallet LED upgrades as a fixed price with a fitting schedule, so you can see exactly what is being replaced, where, and what it should save.
Spare fluorescent tubes are getting harder to buy since the 2023–24 phase-out, which is why many sites in Shepton Mallet now upgrade a floor or a unit at a time rather than waiting for failures.
We cover the whole of Shepton Mallet, including the BA4 postcode district, and nearby places such as Bruton, Castle Cary and St Cuthbert Out.
Shepton Mallet at a glance
What's included
- A walk-round survey counting fittings, wattages, running hours and ceiling types
- Complete LED luminaires rather than tube swaps, so old control gear is removed
- Optional presence and daylight sensors to cut running hours further
- Like-for-like or re-planned layouts so light levels meet BS EN 12464-1
Guide prices in Shepton Mallet
Typical budgets for Shepton Mallet premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £50 – £155 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £205 | per fitting, supplied and fitted |
| LED high bay | £155 – £410 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
Example: 40 LED panels replacing fluorescent fittings in a 400 m² office, about £2,050 – £6,100 excluding VAT. Fixed price after a free survey.
Rules that apply in Shepton Mallet
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Privately rented commercial property in England generally needs an EPC of E or better, or a registered exemption, and lighting is one of the cheaper ways to improve a rating.
Shepton Mallet FAQs
Which rules apply to lighting work in Shepton Mallet?
Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
Do you cover all of Shepton Mallet?
Yes. We work across Shepton Mallet and the BA4 postcode district, plus nearby places such as Bruton, Castle Cary and St Cuthbert Out.
Do you remove the old fittings in Shepton Mallet?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
How long does an office LED upgrade take?
A typical 400 m² office with around 40 fittings is often a one- or two-day job. Larger sites are phased zone by zone, and we can work evenings or weekends.
LED lighting upgrades near Shepton Mallet
- LED lighting upgrades in Bruton
- LED lighting upgrades in Castle Cary
- LED lighting upgrades in St Cuthbert Out
- LED lighting upgrades in Mendip
- LED lighting upgrades in Kilmersdon
- LED lighting upgrades in Glastonbury