LED lighting upgrades in Byker
What we do in Byker: swap fluorescent, halogen and metal halide fittings for efficient LED. Spare fluorescent tubes are getting harder to buy since the 2023–24 phase-out, which is why many sites in Byker now upgrade a floor or a unit at a time rather than waiting for failures.
Local LED lighting upgrades in Byker
Most Byker businesses we survey still have a mix of T8 battens, 600×600 fluorescent panels and the odd halogen downlight. Replacing them with complete LED luminaires usually cuts lighting energy by a third to a half.
Where ceilings in Byker offices are being replaced anyway, we plan the new LED layout to BS EN 12464-1 rather than simply copying the old positions.
Our teams travel to Byker from across Tyne and Wear. Typical nearby jobs include Gosforth, Newcastle upon Tyne and Wallsend, so we can often combine survey visits.
Byker at a glance
What's included
- Like-for-like or re-planned layouts so light levels meet BS EN 12464-1
- Optional presence and daylight sensors to cut running hours further
- Safe removal and recycling of old fluorescent tubes as hazardous waste
- Complete LED luminaires rather than tube swaps, so old control gear is removed
Guide prices in Byker
Typical budgets for Byker premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £50 – £145 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £75 – £190 | per fitting, supplied and fitted |
| LED high bay | £145 – £380 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £75 | per sensor, installed |
Example: 40 LED panels replacing fluorescent fittings in a 400 m² office, about £1,900 – £5,700 excluding VAT. Fixed price after a free survey.
Rules that apply in Byker
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Byker FAQs
Do you cover all of Byker?
Yes. We work across Byker and the NE7, NE2 and NE6 postcode districts, plus nearby places such as Gosforth, Newcastle upon Tyne and Wallsend.
Who does the work in Byker?
Work is carried out by vetted electricians working under S&K Property Investments and Improvement Ltd, which is responsible for the job and invoices you directly.
Do you remove the old fittings in Byker?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
What does an LED upgrade cost?
As a budget, LED panels run at about £50–£150 per fitting supplied and installed, battens £80–£200 and high bays £150–£400, excluding VAT. Access equipment, rewiring and controls are extra.
LED lighting upgrades near Byker
- LED lighting upgrades in Gosforth
- LED lighting upgrades in Newcastle upon Tyne
- LED lighting upgrades in Wallsend
- LED lighting upgrades in Gateshead
- LED lighting upgrades in Felling
- LED lighting upgrades in Longbenton