LED lighting upgrades in the West Midlands
A commercial LED lighting upgrade replaces old fluorescent, halogen, metal halide or sodium fittings with complete LED luminaires, usually on the existing circuits. We cover the West Midlands, including Birmingham, Coventry and Wolverhampton.
LED lighting upgrades work in the West Midlands
Where ceilings in West Midlands offices are being replaced anyway, we plan the new LED layout to BS EN 12464-1 rather than simply copying the old positions.
Most West Midlands businesses we survey still have a mix of T8 battens, 600×600 fluorescent panels and the odd halogen downlight. Replacing them with complete LED luminaires usually cuts lighting energy by a third to a half.
What's included
- Complete LED luminaires rather than tube swaps, so old control gear is removed
- Safe removal and recycling of old fluorescent tubes as hazardous waste
- Optional presence and daylight sensors to cut running hours further
- A walk-round survey counting fittings, wattages, running hours and ceiling types
Guide prices in the West Midlands
Typical budgets for the West Midlands, supplied and installed, excluding VAT. Your fixed price follows a free survey.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £50 – £150 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £200 | per fitting, supplied and fitted |
| LED high bay | £150 – £400 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
Example: 40 LED panels replacing fluorescent fittings in a 400 m² office, about £2,000 – £6,000 excluding VAT.
Rules that apply in the West Midlands
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Privately rented commercial property in England generally needs an EPC of E or better, or a registered exemption, and lighting is one of the cheaper ways to improve a rating.
LED lighting upgrades by town in the West Midlands
- LED lighting upgrades in Birmingham
- LED lighting upgrades in Coventry
- LED lighting upgrades in Wolverhampton
- LED lighting upgrades in Dudley
- LED lighting upgrades in Walsall
- LED lighting upgrades in Solihull
- LED lighting upgrades in Sutton Coldfield
- LED lighting upgrades in West Bromwich
- LED lighting upgrades in Halesowen
- LED lighting upgrades in Stourbridge
- LED lighting upgrades in Smethwick
- LED lighting upgrades in Willenhall
- LED lighting upgrades in Tipton
- LED lighting upgrades in Bloxwich
- LED lighting upgrades in Wednesfield
- LED lighting upgrades in Washwood Heath
- LED lighting upgrades in Aston
- LED lighting upgrades in Shirley
- LED lighting upgrades in Brierley Hill
- LED lighting upgrades in Aldridge
- LED lighting upgrades in Acocks Green
- LED lighting upgrades in Bartley Green
- LED lighting upgrades in Wednesbury
- LED lighting upgrades in Kingswinford
- LED lighting upgrades in Brownhills
- LED lighting upgrades in Castle Bromwich
- LED lighting upgrades in Chelmsley Wood
- LED lighting upgrades in Dorridge
LED lighting upgrades FAQs for the West Midlands
Which towns in the West Midlands do you cover?
All of the West Midlands, including Birmingham, Coventry and Wolverhampton. See the towns list on this page for local pages.
Which fire safety law applies in the West Midlands?
The Regulatory Reform (Fire Safety) Order 2005 sets the duties of the person responsible for fire safety, including emergency lighting where escape routes need it.
How long does an office LED upgrade take?
A typical 400 m² office with around 40 fittings is often a one- or two-day job. Larger sites are phased zone by zone, and we can work evenings or weekends.
Do you just change the tubes?
We recommend replacing the whole luminaire. Retrofit LED tubes leave old ballasts and holders in place, which can fail and complicate future maintenance. A complete fitting is cleaner, more efficient and simpler to certify.