Commercial lighting design in Perth and Kinross
Commercial lighting design means calculating and specifying luminaires, positions and controls so a space gets the right light for its tasks, meets standards such as BS EN 12464-1 and energy rules such as Part L, and is comfortable to work in. We cover Perth and Kinross, including Perth, Auchterarder and Blackford.
Commercial lighting design work in Perth and Kinross
For Perth and Kinross projects with new layouts or tall spaces we model the lighting first, so the fittings ordered actually hit the target lux.
A calculated design gives Perth and Kinross building control or landlords the efficacy evidence they ask for.
What's included
- Fitting selection balancing cost, efficacy and glare
- Lux calculations and plots for each area
- Part L or national efficacy evidence
- Drawings and schedules for tender or installation
Guide prices in Perth and Kinross
Typical budgets for Perth and Kinross, supplied and installed, excluding VAT. Your fixed price follows a free survey.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| Commercial electrician | £300 – £500 | per day |
| LED panel (600×600) | £50 – £150 | per fitting, supplied and fitted |
| DALI dimming and control | £50 – £150 | per luminaire, on top of the fitting |
| LED high bay | £150 – £400 | per fitting, supplied and fitted |
Example: three days of design and calculation work, about £900 – £1,500 excluding VAT.
Rules that apply in Perth and Kinross
Standard 6.5 of the Scottish building standards covers efficient, controllable lighting. The non-domestic guidance uses 95 luminaire lumens per circuit-watt for general lighting, or LENI.
Towns we cover in Perth and Kinross
Commercial lighting design FAQs for Perth and Kinross
What energy rules apply to new lighting in Perth and Kinross?
Section 6 of the Scottish building standards sets the efficiency that new lighting in Perth and Kinross must meet. We check fittings against it at design stage and keep the evidence for building control.
Which towns in Perth and Kinross do you cover?
All of Perth and Kinross, including Perth, Auchterarder and Blackford. See the towns list on this page for local pages.
Do I need a lighting design for an LED upgrade?
For a like-for-like swap in a simple office, a survey is often enough. For new layouts, warehouses, sports areas or where light levels are disputed, a calculated design avoids getting it wrong.
Can you design and install?
Yes. Most clients ask us to design and install so one team is responsible for the result.
Related services in Perth and Kinross
- Lighting surveys and lux testing
- Fit-out and new-build lighting
- Lighting controls
- Emergency lighting installation