Office lighting in Dyfed
Office lighting is the design and installation of luminaires that light desks, meeting rooms, circulation areas and receptions to the right level without glare. We cover Dyfed, including Llanelli, Ammanford and Aberystwyth.

Office lighting work in Dyfed
We usually phase office work in Dyfed over evenings, one zone at a time, so nobody loses a desk while the ceiling is opened up.
Many Dyfed office landlords upgrade lighting between tenancies, because LED with presence sensing helps the EPC and leaves the next occupier with lower running costs.
What's included
- LED panels, linear suspended fittings or downlights to suit your ceilings
- Out-of-hours installation so desks stay usable during the working day
- Layouts that hit around 500 lux on desks with low glare on screens
- Daylight dimming along window bays
Guide prices in Dyfed
Typical budgets for Dyfed, supplied and installed, excluding VAT. Your fixed price follows a free survey.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £50 – £145 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| Daylight sensor | £60 – £115 | per sensor, installed |
| DALI dimming and control | £50 – £145 | per luminaire, on top of the fitting |
Example: 60 LED panels with presence sensing in a 600 m² open-plan office, about £3,500 – £9,900 excluding VAT.
Rules that apply in Dyfed
The Welsh Approved Document L Volume 2 (2022) uses 95 luminaire lumens per circuit-watt for general lighting, with alternatives such as LENI. A new Welsh edition takes effect from 4 March 2027 with a higher figure of more than 105.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Privately rented commercial property in Wales generally needs an EPC of E or better, or a registered exemption, and lighting is one of the cheaper ways to improve a rating.
Office lighting by town in Dyfed
- Office lighting in Llanelli
- Office lighting in Ammanford
- Office lighting in Aberystwyth
- Office lighting in Carmarthen
- Office lighting in Aberaeron
- Office lighting in Boncath
- Office lighting in Cefn Sidan
- Office lighting in Clydau
- Office lighting in Crymych
- Office lighting in Eglwyswrw
- Office lighting in Fishguard
- Office lighting in Geneur Glyn
- Office lighting in Haverfordwest
- Office lighting in Jeffreyston
- Office lighting in Kidwelly
- Office lighting in Llanarth
- Office lighting in Llandovery
- Office lighting in Llanegwad
- Office lighting in Llanfallteg
- Office lighting in Llanfarian
- Office lighting in Llanfihangel-Ar-Arth
- Office lighting in Llangoedmor
- Office lighting in Llangybi
- Office lighting in Llannon
- Office lighting in Llanwenog
- Office lighting in Maenclochog
- Office lighting in Meidrim
- Office lighting in Milford Haven
- Office lighting in Narberth
- Office lighting in New Quay
- Office lighting in Newcastle Emlyn
- Office lighting in Newport
- Office lighting in Nolton
- Office lighting in Pembroke
- Office lighting in Pembroke Dock
- Office lighting in Penally
- Office lighting in Pencaer
- Office lighting in Saundersfoot
- Office lighting in Talley
- Office lighting in Tregaron
- Office lighting in Troedyraur
- Office lighting in Wiston
Office lighting FAQs for Dyfed
Which fire safety law applies in Dyfed?
The Regulatory Reform (Fire Safety) Order 2005 sets the duties of the person responsible for fire safety, including emergency lighting where escape routes need it.
Which towns in Dyfed do you cover?
All of Dyfed, including Llanelli, Ammanford and Aberystwyth. See the towns list on this page for local pages.
Panels or linear pendants?
Recessed 600×600 panels suit suspended grid ceilings and are the simplest swap. Linear suspended fittings suit exposed soffits and can light both the desk and the ceiling, which makes a space feel brighter.
How many lux does an office need?
BS EN 12464-1:2021 gives 500 lux maintained on the task area for writing, reading and data processing. Surrounding areas, corridors and break-out spaces can be lower. The standard also sets limits for glare and uniformity.