Office lighting in Corby
What we do in Corby: glare-free LED lighting for desks, meeting rooms and receptions. Reception areas in Corby often need a warmer, layered look than the open-plan floor, with downlights or a feature pendant over the desk.
Local office lighting in Corby
For office lighting in Corby we design to about 500 lux on desks, as BS EN 12464-1 suggests, and keep glare off screens by choosing the right optics rather than simply adding more light.
We usually phase office work in Corby over evenings, one zone at a time, so nobody loses a desk while the ceiling is opened up.
We cover the whole of Corby, including the NN17 and NN18 postcode districts, and nearby places such as Warkton, Kettering and Market Harborough.
Corby at a glance
What's included
- Layouts that hit around 500 lux on desks with low glare on screens
- Presence detection in meeting rooms, toilets and stores
- Emergency lighting checked and integrated with the new layout
- Out-of-hours installation so desks stay usable during the working day
Guide prices in Corby
Typical budgets for Corby premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED panel (600×600) | £50 – £145 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| Daylight sensor | £60 – £120 | per sensor, installed |
| DALI dimming and control | £50 – £145 | per luminaire, on top of the fitting |
Example: 60 LED panels with presence sensing in a 600 m² open-plan office, about £3,550 – £10,000 excluding VAT. Fixed price after a free survey.
Rules that apply in Corby
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Corby FAQs
Who does the work in Corby?
Work is carried out by vetted electricians working under S&K Property Investments and Improvement Ltd, which is responsible for the job and invoices you directly.
Do you remove the old fittings in Corby?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
Which rules apply to lighting work in Corby?
Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
Can you work outside office hours?
Yes. Most office projects are done in the evening or at weekends, a zone at a time, so staff come back to a working floor.
Office lighting near Corby
- Office lighting in Warkton
- Office lighting in Kettering
- Office lighting in Market Harborough
- Office lighting in Tansor
- Office lighting in Hambleton
- Office lighting in Irthlingborough