Warehouse lighting in Ballygrant
In short: lED high bays and aisle lighting for warehouses and distribution sites. We plan lift access in Ballygrant around your picking routes and loading times, so the warehouse keeps moving while the work is done.
Local warehouse lighting in Ballygrant
Loading bays in Ballygrant need good light at the dock edge and inside trailers. We often add dedicated dock lights alongside the high bay upgrade.
Warehouses around Ballygrant often still run 400 W metal halide or sodium high bays that take minutes to strike up. LED comes on instantly and usually uses less than half the power.
Our teams travel to Ballygrant from across Argyll and Bute. Typical nearby jobs include Port Askaig, Bowmore and Port Charlotte, so we can often combine survey visits.
We cover Ballygrant by arrangement. Because of travel and access, visits are usually grouped with other work in Argyll and Bute, so please allow more time for a survey and tell us about any ferry or access constraints.
Ballygrant at a glance
What's included
- Presence sensing per aisle so empty aisles dim or switch off
- Lux checks after installation against the agreed design
- Replacement of metal halide and sodium fittings and their control gear
- LED high bays or narrow-beam aisle fittings matched to racking heights
Guide prices in Ballygrant
Typical budgets for Ballygrant premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £150 – £400 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £200 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| Scissor or boom lift hire | £150 – £300 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £9,450 – £24,900 excluding VAT. Fixed price after a free survey.
Rules that apply in Ballygrant
Standard 6.5 of the Scottish building standards covers efficient, controllable lighting. The non-domestic guidance uses 95 luminaire lumens per circuit-watt for general lighting, or LENI.
In Great Britain, including Scotland, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Ballygrant FAQs
Which rules apply to lighting work in Ballygrant?
Fire safety duties come from the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006. For new lighting, Section 6 of the Scottish building standards sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
Can you work out of hours in Ballygrant?
Yes. Evening, weekend and phased working is common for Ballygrant offices, shops and warehouses, so the business keeps running.
Do you cover all of Ballygrant?
Yes. We work across Ballygrant and the PA45 and PA46 postcode districts, plus nearby places such as Port Askaig, Bowmore and Port Charlotte.
How much can LED high bays save?
Replacing metal halide with LED often cuts lighting load by around 50–70%. One common example is a 400 W lamp drawing about 430 W with its gear, replaced by a 150 W LED fitting.
Warehouse lighting near Ballygrant
- Warehouse lighting in Port Askaig
- Warehouse lighting in Bowmore
- Warehouse lighting in Port Charlotte
- Warehouse lighting in Port Ellen
- Warehouse lighting in Portnahaven
- Warehouse lighting in Scalasaig