COMMERCIALLighting.uk

Warehouse lighting in Skelmorlie

Warehouse lighting in Skelmorlie: fixed-price quotes, out-of-hours installation and proper paperwork. We also cover Wemyss Bay and Largs.

Warehouse lighting in Skelmorlie

In short: lED high bays and aisle lighting for warehouses and distribution sites. Loading bays in Skelmorlie need good light at the dock edge and inside trailers. We often add dedicated dock lights alongside the high bay upgrade.

Large warehouse with rows of LED high bay lights above pallet racking

Local warehouse lighting in Skelmorlie

In Skelmorlie distribution units the key is the optic. Narrow-beam fittings down each aisle put light on the rack faces where pickers need it, rather than on the top of the racking.

We plan lift access in Skelmorlie around your picking routes and loading times, so the warehouse keeps moving while the work is done.

We cover the whole of Skelmorlie, including the PA17 and PA18 postcode districts, and nearby places such as Wemyss Bay, Largs and Dunoon.

Skelmorlie at a glance

AreaAyrshire
Postcode districtsPA17, PA18
NearbyWemyss Bay, Largs and Dunoon
RulesScottish fire safety law; Section 6 of the Scottish building standards

What's included

  • LED high bays or narrow-beam aisle fittings matched to racking heights
  • Lux checks after installation against the agreed design
  • Loading bay, dock leveller and yard lighting
  • Lift and scaffold access planned around your operation

Guide prices in Skelmorlie

Typical budgets for Skelmorlie premises, supplied and installed, excluding VAT.

Guide prices in Skelmorlie
ItemGuide budget (ex VAT)Basis
LED high bay£150 – £400per fitting, supplied and fitted
LED batten (complete luminaire)£80 – £200per fitting, supplied and fitted
Presence (PIR) sensor£40 – £80per sensor, installed
Scissor or boom lift hire£150 – £300per day

Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £9,450 – £24,900 excluding VAT. Fixed price after a free survey.

Rules that apply in Skelmorlie

Standard 6.5 of the Scottish building standards covers efficient, controllable lighting. The non-domestic guidance uses 95 luminaire lumens per circuit-watt for general lighting, or LENI.

In Great Britain, including Scotland, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.

Skelmorlie FAQs

Is the price fixed?

Yes. After the survey you get a fixed price for the scope agreed. If you add to the scope later, we price the extra before doing it.

Do you remove the old fittings in Skelmorlie?

Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.

Which rules apply to lighting work in Skelmorlie?

Fire safety duties come from the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006. For new lighting, Section 6 of the Scottish building standards sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.

How much can LED high bays save?

Replacing metal halide with LED often cuts lighting load by around 50–70%. One common example is a 400 W lamp drawing about 430 W with its gear, replaced by a 150 W LED fitting.

Warehouse lighting near Skelmorlie

Other lighting services in Skelmorlie

Get a fixed-price lighting quote

Free survey, clear scope, certified work. Prices exclude VAT.