Warehouse lighting in the City of Bristol
Warehouse lighting means high-mounted LED luminaires, usually high bays or linear aisle fittings, that light racking, aisles, loading bays and picking areas. We cover the City of Bristol, including Bristol, Bristol and Bristol.
Warehouse lighting work in the City of Bristol
We plan lift access in City of Bristol around your picking routes and loading times, so the warehouse keeps moving while the work is done.
Warehouses around City of Bristol often still run 400 W metal halide or sodium high bays that take minutes to strike up. LED comes on instantly and usually uses less than half the power.
What's included
- Replacement of metal halide and sodium fittings and their control gear
- Lift and scaffold access planned around your operation
- LED high bays or narrow-beam aisle fittings matched to racking heights
- Presence sensing per aisle so empty aisles dim or switch off
Guide prices in the City of Bristol
Typical budgets for the City of Bristol, supplied and installed, excluding VAT. Your fixed price follows a free survey.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £155 – £410 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £205 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| Scissor or boom lift hire | £155 – £305 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £9,650 – £25,400 excluding VAT.
Rules that apply in the City of Bristol
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Warehouse lighting by town in the City of Bristol
Warehouse lighting FAQs for the City of Bristol
Which fire safety law applies in the City of Bristol?
The Regulatory Reform (Fire Safety) Order 2005 sets the duties of the person responsible for fire safety, including emergency lighting where escape routes need it.
How are prices set in the City of Bristol?
Our guide prices are adjusted for regional labour costs. After a survey you get a fixed price for the agreed scope.
How much can LED high bays save?
Replacing metal halide with LED often cuts lighting load by around 50–70%. One common example is a 400 W lamp drawing about 430 W with its gear, replaced by a 150 W LED fitting.
Do you need to shut the warehouse?
No. We plan lift access around your picking routes and usually work at night, at weekends or across quieter shifts.