Warehouse lighting in Pembroke
In short: lED high bays and aisle lighting for warehouses and distribution sites. Warehouses around Pembroke often still run 400 W metal halide or sodium high bays that take minutes to strike up. LED comes on instantly and usually uses less than half the power.
Local warehouse lighting in Pembroke
Loading bays in Pembroke need good light at the dock edge and inside trailers. We often add dedicated dock lights alongside the high bay upgrade.
In Pembroke distribution units the key is the optic. Narrow-beam fittings down each aisle put light on the rack faces where pickers need it, rather than on the top of the racking.
Pembroke is a smaller town, covered by postcode districts SA71 and SA72. We regularly work across Dyfed, so access, parking and out-of-hours working are planned before we arrive.
Pembroke at a glance
What's included
- Replacement of metal halide and sodium fittings and their control gear
- LED high bays or narrow-beam aisle fittings matched to racking heights
- Lift and scaffold access planned around your operation
- Presence sensing per aisle so empty aisles dim or switch off
Guide prices in Pembroke
Typical budgets for Pembroke premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £145 – £390 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £195 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| Scissor or boom lift hire | £145 – £290 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £9,150 – £24,150 excluding VAT. Fixed price after a free survey.
Rules that apply in Pembroke
The Welsh Approved Document L Volume 2 (2022) uses 95 luminaire lumens per circuit-watt for general lighting, with alternatives such as LENI. A new Welsh edition takes effect from 4 March 2027 with a higher figure of more than 105.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Pembroke FAQs
Do you remove the old fittings in Pembroke?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
How quickly can you survey in Pembroke?
Most surveys in Pembroke can be booked within a few working days. Tell us about any deadlines, such as a lease end or a fire risk assessment action, and we will try to fit around them.
Do you cover all of Pembroke?
Yes. We work across Pembroke and the SA71 and SA72 postcode districts, plus nearby places such as Pembroke Dock, Milford Haven and Jeffreyston.
How much can LED high bays save?
Replacing metal halide with LED often cuts lighting load by around 50–70%. One common example is a 400 W lamp drawing about 430 W with its gear, replaced by a 150 W LED fitting.
Warehouse lighting near Pembroke
- Warehouse lighting in Pembroke Dock
- Warehouse lighting in Milford Haven
- Warehouse lighting in Jeffreyston
- Warehouse lighting in Penally
- Warehouse lighting in Haverfordwest
- Warehouse lighting in Saundersfoot