Warehouse lighting in Bexhill-on-Sea
In short: lED high bays and aisle lighting for warehouses and distribution sites. Warehouses around Bexhill-on-Sea often still run 400 W metal halide or sodium high bays that take minutes to strike up. LED comes on instantly and usually uses less than half the power.
Local warehouse lighting in Bexhill-on-Sea
In Bexhill-on-Sea distribution units the key is the optic. Narrow-beam fittings down each aisle put light on the rack faces where pickers need it, rather than on the top of the racking.
For Bexhill-on-Sea sites with roof lights, daylight sensing can hold the high bays at a low level for much of a summer day.
Our teams travel to Bexhill-on-Sea from across East Sussex. Typical nearby jobs include Battle, Hastings and Westham, so we can often combine survey visits.
Bexhill-on-Sea at a glance
What's included
- LED high bays or narrow-beam aisle fittings matched to racking heights
- Presence sensing per aisle so empty aisles dim or switch off
- Lift and scaffold access planned around your operation
- Replacement of metal halide and sodium fittings and their control gear
Guide prices in Bexhill-on-Sea
Typical budgets for Bexhill-on-Sea premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £160 – £430 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £85 – £215 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £45 – £85 | per sensor, installed |
| Scissor or boom lift hire | £160 – £320 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £10,100 – £26,650 excluding VAT. Fixed price after a free survey.
Rules that apply in Bexhill-on-Sea
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Bexhill-on-Sea FAQs
Do you remove the old fittings in Bexhill-on-Sea?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
Which rules apply to lighting work in Bexhill-on-Sea?
Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
Who does the work in Bexhill-on-Sea?
Work is carried out by vetted electricians working under S&K Property Investments and Improvement Ltd, which is responsible for the job and invoices you directly.
How much can LED high bays save?
Replacing metal halide with LED often cuts lighting load by around 50–70%. One common example is a 400 W lamp drawing about 430 W with its gear, replaced by a 150 W LED fitting.
Warehouse lighting near Bexhill-on-Sea
- Warehouse lighting in Battle
- Warehouse lighting in Hastings
- Warehouse lighting in Westham
- Warehouse lighting in Salehurst
- Warehouse lighting in Hailsham
- Warehouse lighting in Eastbourne