Warehouse lighting in Seaford
In short: lED high bays and aisle lighting for warehouses and distribution sites. Warehouses around Seaford often still run 400 W metal halide or sodium high bays that take minutes to strike up. LED comes on instantly and usually uses less than half the power.
Local warehouse lighting in Seaford
Aisle-by-aisle presence sensing works well in Seaford warehouses where some aisles are only visited a few times an hour.
We plan lift access in Seaford around your picking routes and loading times, so the warehouse keeps moving while the work is done.
Seaford is a working town with a good mix of businesses, covered by postcode districts BN25 and BN9. We regularly work across East Sussex, so access, parking and out-of-hours working are planned before we arrive.
Seaford at a glance
What's included
- Presence sensing per aisle so empty aisles dim or switch off
- LED high bays or narrow-beam aisle fittings matched to racking heights
- Replacement of metal halide and sodium fittings and their control gear
- Lux checks after installation against the agreed design
Guide prices in Seaford
Typical budgets for Seaford premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £160 – £430 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £85 – £215 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £45 – £85 | per sensor, installed |
| Scissor or boom lift hire | £160 – £320 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £10,100 – £26,650 excluding VAT. Fixed price after a free survey.
Rules that apply in Seaford
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Seaford FAQs
Do you remove the old fittings in Seaford?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
Who does the work in Seaford?
Work is carried out by vetted electricians working under S&K Property Investments and Improvement Ltd, which is responsible for the job and invoices you directly.
Can you work out of hours in Seaford?
Yes. Evening, weekend and phased working is common for Seaford offices, shops and warehouses, so the business keeps running.
How much can LED high bays save?
Replacing metal halide with LED often cuts lighting load by around 50–70%. One common example is a 400 W lamp drawing about 430 W with its gear, replaced by a 150 W LED fitting.
Warehouse lighting near Seaford
- Warehouse lighting in Newhaven
- Warehouse lighting in Peacehaven
- Warehouse lighting in Long Man
- Warehouse lighting in Rottingdean
- Warehouse lighting in Eastbourne
- Warehouse lighting in Lewes