Warehouse lighting in Essex
Warehouse lighting means high-mounted LED luminaires, usually high bays or linear aisle fittings, that light racking, aisles, loading bays and picking areas. We cover Essex, including Southend-on-Sea, Basildon and Colchester.
Warehouse lighting work in Essex
Warehouses around Essex often still run 400 W metal halide or sodium high bays that take minutes to strike up. LED comes on instantly and usually uses less than half the power.
For Essex sites with roof lights, daylight sensing can hold the high bays at a low level for much of a summer day.
What's included
- Lux checks after installation against the agreed design
- Loading bay, dock leveller and yard lighting
- Lift and scaffold access planned around your operation
- Presence sensing per aisle so empty aisles dim or switch off
Guide prices in Essex
Typical budgets for Essex, supplied and installed, excluding VAT. Your fixed price follows a free survey.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £155 – £410 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £205 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| Scissor or boom lift hire | £155 – £310 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £9,750 – £25,650 excluding VAT.
Rules that apply in Essex
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Warehouse lighting by town in Essex
- Warehouse lighting in Southend-on-Sea
- Warehouse lighting in Basildon
- Warehouse lighting in Colchester
- Warehouse lighting in Chelmsford
- Warehouse lighting in Harlow
- Warehouse lighting in Grays
- Warehouse lighting in Braintree
- Warehouse lighting in Brentwood
- Warehouse lighting in Clacton-on-Sea
- Warehouse lighting in South Benfleet
- Warehouse lighting in Canvey Island
- Warehouse lighting in Billericay
- Warehouse lighting in Rayleigh
- Warehouse lighting in Stanford-le-Hope
- Warehouse lighting in Wickford
- Warehouse lighting in Witham
- Warehouse lighting in Pitsea
- Warehouse lighting in Maldon
- Warehouse lighting in Waltham Abbey
- Warehouse lighting in South Ockendon
- Warehouse lighting in Harwich
- Warehouse lighting in Hadleigh
- Warehouse lighting in Walton-on-the-Naze
- Warehouse lighting in Frinton-on-Sea
- Warehouse lighting in Rochford
- Warehouse lighting in Saffron Walden
- Warehouse lighting in Bures Hamlet
- Warehouse lighting in Danbury
- Warehouse lighting in Elmstead
- Warehouse lighting in Epping
- Warehouse lighting in Fordham
- Warehouse lighting in Great Dunmow
- Warehouse lighting in Great Hallingbury
- Warehouse lighting in Hockley
- Warehouse lighting in Ingatestone
- Warehouse lighting in Layer Breton
- Warehouse lighting in Little Clacton
- Warehouse lighting in Loughton
- Warehouse lighting in Mistley
- Warehouse lighting in Newport
- Warehouse lighting in Ongar
- Warehouse lighting in Sible Hedingham
- Warehouse lighting in Southminster
- Warehouse lighting in Stansted Mountfitchet
- Warehouse lighting in Stapleford Abbotts
Warehouse lighting FAQs for Essex
How are prices set in Essex?
Our guide prices are adjusted for regional labour costs. After a survey you get a fixed price for the agreed scope.
What energy rules apply to new lighting in Essex?
Approved Document L sets the efficiency that new lighting in Essex must meet. We check fittings against it at design stage and keep the evidence for building control.
What lux level does a warehouse need?
It depends on the task. BS EN 12464-1:2021 examples include 100 lux for stores and stockrooms, 150 lux at the floor of rack storage, 200 lux for open storage and loading, and 300 lux for packing and grouping.
How much can LED high bays save?
Replacing metal halide with LED often cuts lighting load by around 50–70%. One common example is a 400 W lamp drawing about 430 W with its gear, replaced by a 150 W LED fitting.