Warehouse lighting in Acton
In short: lED high bays and aisle lighting for warehouses and distribution sites. For Acton sites with roof lights, daylight sensing can hold the high bays at a low level for much of a summer day.
Local warehouse lighting in Acton
Warehouses around Acton often still run 400 W metal halide or sodium high bays that take minutes to strike up. LED comes on instantly and usually uses less than half the power.
We plan lift access in Acton around your picking routes and loading times, so the warehouse keeps moving while the work is done.
We cover the whole of Acton, including the W3, W5 and W4 postcode districts, and nearby places such as Ealing Common, Chiswick and West Ealing.
Acton at a glance
What's included
- LED high bays or narrow-beam aisle fittings matched to racking heights
- Presence sensing per aisle so empty aisles dim or switch off
- Lux checks after installation against the agreed design
- Replacement of metal halide and sodium fittings and their control gear
Guide prices in Acton
Typical budgets for Acton premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £175 – £460 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £90 – £230 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £45 – £90 | per sensor, installed |
| Scissor or boom lift hire | £175 – £345 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £10,850 – £28,650 excluding VAT. Fixed price after a free survey.
Rules that apply in Acton
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Acton FAQs
Who does the work in Acton?
Work is carried out by vetted electricians working under S&K Property Investments and Improvement Ltd, which is responsible for the job and invoices you directly.
Is the price fixed?
Yes. After the survey you get a fixed price for the scope agreed. If you add to the scope later, we price the extra before doing it.
Which rules apply to lighting work in Acton?
Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
How much can LED high bays save?
Replacing metal halide with LED often cuts lighting load by around 50–70%. One common example is a 400 W lamp drawing about 430 W with its gear, replaced by a 150 W LED fitting.
Warehouse lighting near Acton
- Warehouse lighting in Ealing Common
- Warehouse lighting in Chiswick
- Warehouse lighting in West Ealing
- Warehouse lighting in Harlesden
- Warehouse lighting in Shepherds Bush
- Warehouse lighting in Willesden