Warehouse lighting in Enfield Lock
In short: lED high bays and aisle lighting for warehouses and distribution sites. Warehouses around Enfield Lock often still run 400 W metal halide or sodium high bays that take minutes to strike up. LED comes on instantly and usually uses less than half the power.
Local warehouse lighting in Enfield Lock
Aisle-by-aisle presence sensing works well in Enfield Lock warehouses where some aisles are only visited a few times an hour.
For Enfield Lock sites with roof lights, daylight sensing can hold the high bays at a low level for much of a summer day.
Our teams travel to Enfield Lock from across Greater London. Typical nearby jobs include Waltham Abbey, Ponders End and Cheshunt, so we can often combine survey visits.
Enfield Lock at a glance
What's included
- Presence sensing per aisle so empty aisles dim or switch off
- Lift and scaffold access planned around your operation
- Replacement of metal halide and sodium fittings and their control gear
- LED high bays or narrow-beam aisle fittings matched to racking heights
Guide prices in Enfield Lock
Typical budgets for Enfield Lock premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £175 – £460 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £90 – £230 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £45 – £90 | per sensor, installed |
| Scissor or boom lift hire | £175 – £345 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £10,850 – £28,650 excluding VAT. Fixed price after a free survey.
Rules that apply in Enfield Lock
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Enfield Lock FAQs
Do you remove the old fittings in Enfield Lock?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
Who does the work in Enfield Lock?
Work is carried out by vetted electricians working under S&K Property Investments and Improvement Ltd, which is responsible for the job and invoices you directly.
Which rules apply to lighting work in Enfield Lock?
Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
How much can LED high bays save?
Replacing metal halide with LED often cuts lighting load by around 50–70%. One common example is a 400 W lamp drawing about 430 W with its gear, replaced by a 150 W LED fitting.
Warehouse lighting near Enfield Lock
- Warehouse lighting in Waltham Abbey
- Warehouse lighting in Ponders End
- Warehouse lighting in Cheshunt
- Warehouse lighting in Enfield
- Warehouse lighting in Chingford
- Warehouse lighting in Edmonton