Warehouse lighting in Denny Lodge
In short: lED high bays and aisle lighting for warehouses and distribution sites. In Denny Lodge distribution units the key is the optic. Narrow-beam fittings down each aisle put light on the rack faces where pickers need it, rather than on the top of the racking.
Local warehouse lighting in Denny Lodge
Many Denny Lodge sites run two or three shifts, so lighting hours are high and LED payback is quick, often inside three years.
Aisle-by-aisle presence sensing works well in Denny Lodge warehouses where some aisles are only visited a few times an hour.
We cover the whole of Denny Lodge, including the SO42 and SO41 postcode districts, and nearby places such as Lymington, Lyndhurst and Hythe.
Denny Lodge at a glance
What's included
- Presence sensing per aisle so empty aisles dim or switch off
- LED high bays or narrow-beam aisle fittings matched to racking heights
- Lux checks after installation against the agreed design
- Replacement of metal halide and sodium fittings and their control gear
Guide prices in Denny Lodge
Typical budgets for Denny Lodge premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £160 – £430 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £85 – £215 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £45 – £85 | per sensor, installed |
| Scissor or boom lift hire | £160 – £320 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £10,100 – £26,650 excluding VAT. Fixed price after a free survey.
Rules that apply in Denny Lodge
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Denny Lodge FAQs
Do you cover all of Denny Lodge?
Yes. We work across Denny Lodge and the SO42 and SO41 postcode districts, plus nearby places such as Lymington, Lyndhurst and Hythe.
Do you remove the old fittings in Denny Lodge?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
Can you work out of hours in Denny Lodge?
Yes. Evening, weekend and phased working is common for Denny Lodge offices, shops and warehouses, so the business keeps running.
How much can LED high bays save?
Replacing metal halide with LED often cuts lighting load by around 50–70%. One common example is a 400 W lamp drawing about 430 W with its gear, replaced by a 150 W LED fitting.
Warehouse lighting near Denny Lodge
- Warehouse lighting in Lymington
- Warehouse lighting in Lyndhurst
- Warehouse lighting in Hythe
- Warehouse lighting in New Milton
- Warehouse lighting in Totton
- Warehouse lighting in Yarmouth