Warehouse lighting in Allensmore
In short: lED high bays and aisle lighting for warehouses and distribution sites. Many Allensmore sites run two or three shifts, so lighting hours are high and LED payback is quick, often inside three years.
Local warehouse lighting in Allensmore
Warehouses around Allensmore often still run 400 W metal halide or sodium high bays that take minutes to strike up. LED comes on instantly and usually uses less than half the power.
In Allensmore distribution units the key is the optic. Narrow-beam fittings down each aisle put light on the rack faces where pickers need it, rather than on the top of the racking.
Allensmore is a local centre, covered by postcode district HR2. We regularly work across Herefordshire, so access, parking and out-of-hours working are planned before we arrive.
Allensmore at a glance
What's included
- Presence sensing per aisle so empty aisles dim or switch off
- Lux checks after installation against the agreed design
- Replacement of metal halide and sodium fittings and their control gear
- Loading bay, dock leveller and yard lighting
Guide prices in Allensmore
Typical budgets for Allensmore premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £150 – £400 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £200 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| Scissor or boom lift hire | £150 – £300 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £9,450 – £24,900 excluding VAT. Fixed price after a free survey.
Rules that apply in Allensmore
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Allensmore FAQs
How quickly can you survey in Allensmore?
Most surveys in Allensmore can be booked within a few working days. Tell us about any deadlines, such as a lease end or a fire risk assessment action, and we will try to fit around them.
Who does the work in Allensmore?
Work is carried out by vetted electricians working under S&K Property Investments and Improvement Ltd, which is responsible for the job and invoices you directly.
Do you cover all of Allensmore?
Yes. We work across Allensmore and the HR2 postcode district, plus nearby places such as Hereford, Burghill and Hampton Bishop.
How much can LED high bays save?
Replacing metal halide with LED often cuts lighting load by around 50–70%. One common example is a 400 W lamp drawing about 430 W with its gear, replaced by a 150 W LED fitting.
Warehouse lighting near Allensmore
- Warehouse lighting in Hereford
- Warehouse lighting in Burghill
- Warehouse lighting in Hampton Bishop
- Warehouse lighting in Ross-on-Wye
- Warehouse lighting in Clifford
- Warehouse lighting in Monmouth