Warehouse lighting in Cranbrook
In short: lED high bays and aisle lighting for warehouses and distribution sites. We plan lift access in Cranbrook around your picking routes and loading times, so the warehouse keeps moving while the work is done.
Local warehouse lighting in Cranbrook
Many Cranbrook sites run two or three shifts, so lighting hours are high and LED payback is quick, often inside three years.
Warehouses around Cranbrook often still run 400 W metal halide or sodium high bays that take minutes to strike up. LED comes on instantly and usually uses less than half the power.
We cover the whole of Cranbrook, including the TN17 and TN18 postcode districts, and nearby places such as Four Throws, Yalding and Tenterden.
Cranbrook at a glance
What's included
- LED high bays or narrow-beam aisle fittings matched to racking heights
- Presence sensing per aisle so empty aisles dim or switch off
- Replacement of metal halide and sodium fittings and their control gear
- Lux checks after installation against the agreed design
Guide prices in Cranbrook
Typical budgets for Cranbrook premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £160 – £430 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £85 – £215 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £45 – £85 | per sensor, installed |
| Scissor or boom lift hire | £160 – £320 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £10,100 – £26,650 excluding VAT. Fixed price after a free survey.
Rules that apply in Cranbrook
Approved Document L (2021 edition, with 2023 amendments) asks for new general lighting to average at least 95 luminaire lumens per circuit-watt, or to use the LENI method. The 2026 edition raises this to more than 105 for work under it from 24 March 2027.
In Great Britain, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Cranbrook FAQs
Which rules apply to lighting work in Cranbrook?
Fire safety duties come from the Regulatory Reform (Fire Safety) Order 2005. For new lighting, Approved Document L sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
Do you cover all of Cranbrook?
Yes. We work across Cranbrook and the TN17 and TN18 postcode districts, plus nearby places such as Four Throws, Yalding and Tenterden.
How quickly can you survey in Cranbrook?
Most surveys in Cranbrook can be booked within a few working days. Tell us about any deadlines, such as a lease end or a fire risk assessment action, and we will try to fit around them.
How much can LED high bays save?
Replacing metal halide with LED often cuts lighting load by around 50–70%. One common example is a 400 W lamp drawing about 430 W with its gear, replaced by a 150 W LED fitting.
Warehouse lighting near Cranbrook
- Warehouse lighting in Four Throws
- Warehouse lighting in Yalding
- Warehouse lighting in Tenterden
- Warehouse lighting in Wadhurst
- Warehouse lighting in Salehurst
- Warehouse lighting in Burwash