Warehouse lighting in Blantyre
In short: lED high bays and aisle lighting for warehouses and distribution sites. Warehouses around Blantyre often still run 400 W metal halide or sodium high bays that take minutes to strike up. LED comes on instantly and usually uses less than half the power.
Local warehouse lighting in Blantyre
In Blantyre distribution units the key is the optic. Narrow-beam fittings down each aisle put light on the rack faces where pickers need it, rather than on the top of the racking.
Aisle-by-aisle presence sensing works well in Blantyre warehouses where some aisles are only visited a few times an hour.
Blantyre is a town with plenty of offices, shops and units, covered by postcode districts G72, G71 and ML3. We regularly work across Lanarkshire, so access, parking and out-of-hours working are planned before we arrive.
Blantyre at a glance
What's included
- LED high bays or narrow-beam aisle fittings matched to racking heights
- Lift and scaffold access planned around your operation
- Presence sensing per aisle so empty aisles dim or switch off
- Lux checks after installation against the agreed design
Guide prices in Blantyre
Typical budgets for Blantyre premises, supplied and installed, excluding VAT.
| Item | Guide budget (ex VAT) | Basis |
|---|---|---|
| LED high bay | £150 – £400 | per fitting, supplied and fitted |
| LED batten (complete luminaire) | £80 – £200 | per fitting, supplied and fitted |
| Presence (PIR) sensor | £40 – £80 | per sensor, installed |
| Scissor or boom lift hire | £150 – £300 | per day |
Example: 60 LED high bays in a 3,000 m² warehouse, with 3 days of lift hire, about £9,450 – £24,900 excluding VAT. Fixed price after a free survey.
Rules that apply in Blantyre
Standard 6.5 of the Scottish building standards covers efficient, controllable lighting. The non-domestic guidance uses 95 luminaire lumens per circuit-watt for general lighting, or LENI.
In Great Britain, including Scotland, common T8 fluorescent tubes were caught by ecodesign rules from 1 September 2023 and the mercury exemptions for ordinary T5 and T8 lamps ended on 1 February 2024.
Blantyre FAQs
Do you remove the old fittings in Blantyre?
Yes. Old fittings are removed, and fluorescent tubes are recycled as hazardous waste through an authorised route, with paperwork for your records.
Which rules apply to lighting work in Blantyre?
Fire safety duties come from the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006. For new lighting, Section 6 of the Scottish building standards sets the energy efficiency requirements. We design and certify work to BS 7671 and, for emergency lighting, BS 5266-1.
How quickly can you survey in Blantyre?
Most surveys in Blantyre can be booked within a few working days. Tell us about any deadlines, such as a lease end or a fire risk assessment action, and we will try to fit around them.
How much can LED high bays save?
Replacing metal halide with LED often cuts lighting load by around 50–70%. One common example is a 400 W lamp drawing about 430 W with its gear, replaced by a 150 W LED fitting.
Warehouse lighting near Blantyre
- Warehouse lighting in Bothwell
- Warehouse lighting in Uddingston
- Warehouse lighting in Viewpark
- Warehouse lighting in Cambuslang
- Warehouse lighting in Hamilton
- Warehouse lighting in Bellshill